FordParts
My Garage
My Account
Cart
OEM 2002 Ford Mustang Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2002 Ford Mustang Cable Assembly Part Number: YR3Z-14300-EA
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Manufacturer Note: Includes 14300, 14301 and oil pressure connection, when engine immersion heater is required order 6B018 seperate
- Replaces: XR3Z-14300-AA
- Base No.: 14300
- Item Weight: 3.50 Pounds
- Item Dimensions: 13.8 x 3.4 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YR3Z-14300-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Mustang Cable Assembly Part Number: YR3Z-14300-BA
Product Specifications- Other Name: Cable Assembly - Battery; Battery Cables; Cable Assembly - Battery To Battery
- Manufacturer Note: Includes 14300, 14301, and oil pressure connection. When engine immersion heater is required, order 6B018 separately.
- Base No.: 14300
- Item Weight: 4.40 Pounds
- Item Dimensions: 3.7 x 13.5 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YR3Z-14300-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Mustang Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Mustang Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Mustang Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Mustang Battery Cable Parts Q&A
- Q: How to service and repair the battery cable on 2002 Ford Mustang?A: Battery cable service necessitates the battery removal phase where explosive gases produced by the battery will make it dangerous to work near flames or sparks or lighted substances. Protect your face with proper equipment and your eyes using protective gear and maintain sufficient airflow as a safety measure. Protection from children should apply to battery storage while users need to protect their bodies from exposure to sulfuric acid chemicals and batteries. Contact with battery acid demands immediate water flush of the affected area for at least 15 minutes and medical treatment. The removal process starts with removing the power distribution box positive cable attachment nut before moving toward the negative cable harness ground retaining bolt at the radiator support and the cable harness clips from the inner fender. Open the clamp end by bending it before removing the cable harness from the front support bracket. Please lift the vehicle then sustain it with support before unfastening the front bottom cable harness bracket nuts. The engine block negative ground attachment nut must be removed with proper torque set to 25 Nm (18 Lb-Ft) to avoid ground circuit failure. Proceed with unclipping the cable harness clamp nut followed by disconnecting the cable nuts from the starter solenoid. The opposite process should be followed when installing the hardware. The adaptive learning process of the vehicle may display unusual driving behavior after battery disconnect and connect because it needs to rebuild its adaptive strategy through driving at least 16 km (10 miles) of distance.