FordParts
My Garage
My Account
Cart
OEM 2002 Ford Thunderbird Radiator Support
Center Radiator Support- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Radiator Supports found
Product Specifications- Other Name: Support - Radiator; Radiator Support Panel, Front; Upper Tie Bar
- Position: Front
- Replaces: XW4Z-16138-AA
- Base No.: 16138
- Item Weight: 15.80 Pounds
- Item Dimensions: 65.5 x 16.2 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-16138-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Bracket; Radiator Mount Bracket, Left Upper
- Position: Upper Driver Side
- Base No.: 8A193
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-8A193-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Bracket; Radiator Mount Bracket, Right Upper
- Position: Upper Passenger Side
- Base No.: 8A193
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-8A193-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Ford Thunderbird Radiator Support
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Thunderbird Radiator Support available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Thunderbird Radiator Support as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Thunderbird Radiator Support Parts Q&A
- Q: How to service and repair the front cross-member, specifically the radiator support on 2002 Ford Thunderbird?A: The first step in repairing the radiator support on the front cross-member requires radiator support stabilization. Start the procedure by removing both stabilizer links then move onto the front wheel assemblies before popping out the front valance panel by uninstalling its bolts and pin-type retainer. The lower radiator air deflector should be removed by firstly unscrewing the bolt then removing the pin-type retainer. Remove the 10 bolts that hold the front cross brace before detaching the bolts to position the steering gear aside while discarding the lock nuts. The replacement of new cam bolts and lock nuts becomes necessary whenever removing these parts from the lower control arm. Lift out the four bolts which allow positioning of two lower control arms to the side while discarding the parts. The procedure requires removal of water control valve bracket bolts as well as power steering and A/C line bracket bolts followed by this step. Cap off the project by uninstalling the four bolts holding the radiator support crossmember then transfer essential components before installing everything in reverse order with correct torque values.