How to service the power mirror switch on 2002 Lincoln Continental?

Tools needed To service the power mirror switch, use extreme care to remove the outside rearview mirror motor out of the front door trim panel, with a shop towel between the pry tool and the trim to avoid damaging the trim. Unscrew the electric connector and take off the control switch. Rebuild using the reverse procedure.

OEM 2002 Lincoln Continental Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2002 Lincoln Continental Mirror Switch Part Number: F2TZ-17B676-A
Product Specifications
- Other Name: Switch - Electrical; Power Mirror Switch; Switch - Electrically Operated Mirror
- Base No.: 17B676
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.9 x 2.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F2TZ-17B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Lincoln Continental Submodels:
- Anniversary, Base, Diamond Anniversary, Signature, Spinnaker Edition | 8 Cyl 4.6 L GAS

2002 Lincoln Continental Mirror Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Continental Mirror Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Continental Mirror Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Lincoln Continental Mirror Switch Parts Q&A

Q: How to service the power mirror switch on 2002 Lincoln Continental?
A: Tools needed To service the power mirror switch, use extreme care to remove the outside rearview mirror motor out of the front door trim panel, with a shop towel between the pry tool and the trim to avoid damaging the trim. Unscrew the electric connector and take off the control switch. Rebuild using the reverse procedure.