FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln LS Oil Cooler
Engine Oil Cooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Oil Coolers found
2002 Lincoln LS Oil Cooler Part Number: XW4Z-6A642-AA
Product Specifications- Other Name: Oil Cooler Assembly; Engine Oil Cooler
- Manufacturer Note: For Coolant Hoses To Oil Cooler, Refer To 8286 Lower Radiator Hose
- Base No.: 6A642
- Item Weight: 3.60 Pounds
- Item Dimensions: 8.3 x 6.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-6A642-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln LS Oil Cooler Part Number: 2W4Z-6A642-BB
Product Specifications- Other Name: Oil Cooler Assembly
- Base No.: 6A642
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.3 x 6.4 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2W4Z-6A642-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln LS Oil Cooler
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln LS Oil Cooler available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln LS Oil Cooler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln LS Oil Cooler Parts Q&A
- Q: How to service the oil cooler on 2002 Lincoln LS?A: Service of the oil cooler starts with draining the engine cooling system followed by vehicle elevation and support. Start by taking off all oil cooler hoses and unfastening the bolt supporting the oil cooler and proceeding to eliminate the oil cooler unit. Check the gasket condition then replace it if any damage is present. Do a complete check for contamination on the gasket surfaces and the corresponding parts before their installation. Install the oil cooler together with its gasket and start the bolt by turning the unit clockwise until it reaches the stop position. Reinstallation of oil cooler hoses must be followed by vehicle lowering procedure before refilling engine cooling system.