OEM 2002 Lincoln Navigator Seat Switch

2002 Lincoln Navigator Seat Switch Parts Questions & Experts Answers

• Q: How to service and repair the power seat switch without side air bags on 2002 Lincoln Navigator?

  A: A technician must disconnect the battery ground cable at the beginning of power seat switch servicing operations when side air bags are absent. First uncover the front seat back adjust handle screw and remove it while performing a lumbar support handle pull-off procedure. The next step requires removing screws that hold the front seat track shield in place and then removing its pin-type retainer from the shield's back side. Disconnection of the seat regulator control switch from the front of the shield will need removal of screws first followed by disconnecting the switch. Disconnection of seat heating switches should be performed on vehicles with this feature. The process begins by disconnecting the electrical connector of the seat regulator control switch. Afterwards, the switch should be removed from the system. To reinstall the assembly follow all the reversal steps from disassembly. During battery disconnect and reconnection you must be aware the vehicle could show unusual driving symptoms as it adapts its strategy through normal driving for a minimum distance of 16 kilometers (10 miles). Heated seat models require a reconnection of the switch while performing installation procedures.