How to service and repair the air duct on 2003 Ford Crown Victoria?

The first step to fix the air duct requires instrument panel removal. You must start by unscrewing then removing the bracket along with the screw before unfastening the in-car temperature sensor hose retainers. The service begins by unwinding screws from both the right-hand (RH) panel duct followed by screws on the RH demister nozzle. The procedure should be repeated for the left-hand (LH) demister nozzle by removing its screws. Separate the radio antenna while you detach all screws holding the LH panel duct to the defroster duct and keep the duct attached. Remove the air distribution assembly screws and then take out the LH panel duct after that. To erect the object follow the opposite sequence of steps used for breaking it down.

OEM 2003 Ford Crown Victoria Air Duct

Air Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Ducts found

View related parts
2003 Ford Crown Victoria Air Inlet Part Number: F5AZ-9A624-AA
Product Specifications
- Other Name: Hose - Air; Engine Air Intake Hose
- Base No.: 9A624
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5AZ-9A624-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2003 Ford Crown Victoria Resonator Assembly Part Number: 4W1Z-9B659-AA
Product Specifications
- Other Name: Hose - Air; Engine Air Intake Hose; Air Outlet Tube; Outlet Tube
- Base No.: 9F763
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W1Z-9B659-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
2003 Ford Crown Victoria Outlet Tube Part Number: F6AZ-9B659-AC
Product Specifications
- Other Name: Hose - Air; Engine Air Intake Hose
- Manufacturer Note: 3 pc. tube asy., NGV only
- Base No.: 9B659
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6AZ-9B659-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

2003 Ford Crown Victoria Air Duct

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Crown Victoria Air Duct available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Crown Victoria Air Duct as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Crown Victoria Air Duct Parts Q&A

Q: How to service and repair the air duct on 2003 Ford Crown Victoria?
A: The first step to fix the air duct requires instrument panel removal. You must start by unscrewing then removing the bracket along with the screw before unfastening the in-car temperature sensor hose retainers. The service begins by unwinding screws from both the right-hand (RH) panel duct followed by screws on the RH demister nozzle. The procedure should be repeated for the left-hand (LH) demister nozzle by removing its screws. Separate the radio antenna while you detach all screws holding the LH panel duct to the defroster duct and keep the duct attached. Remove the air distribution assembly screws and then take out the LH panel duct after that. To erect the object follow the opposite sequence of steps used for breaking it down.