How to Service and Repair Coil Springs on 2003 Ford Escape?

Service and repair of the coil spring must start with wheel removal and tire removal followed by finger-tightening one lug nut for retaining the drum when drum retainers were taken off. Chlorinate the brake line from the wheel cylinder and break the brake line bracket bolt free from its position. The anti-lock brake sensor should be positioned aside by removing the ABS sensor bolt and bracket bolts when working on ABS-equipped vehicles. Secure the rear wheel knuckle before taking out the upper arm bolt and starting the process to loosen the lower arm bolt. You should now disconnect the lower shock nut and save it aside. Note the position of both the spring insulator and spring for correct installation before you remove the spring and lower the support to the wheel knuckle. The installation process ends with the return of removal steps along with brake system bleeding procedure.

OEM 2003 Ford Escape Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coil Springs found

View related parts
2003 Ford Escape Coil Spring, Front Part Number: YL8Z-5310-AA
$61.42 MSRP: $84.97
You Save: $23.55 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 5.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YL8Z-5310-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Coil Spring, Rear Part Number: YL8Z-5560-CA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Spring Kit Rear; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Base No.: 5560
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YL8Z-5560-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Coil Spring, Front Part Number: YL8Z5310LA
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs
- Position: Front
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z5310LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Spring, Rear Part Number: YL8Z-5560-AA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Spring Kit Rear; Coil Spring Set; Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 5.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YL8Z-5560-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS

2003 Ford Escape Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escape Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escape Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Escape Coil Springs Parts Q&A

Q: How to Service and Repair Coil Springs on 2003 Ford Escape?
A: Service and repair of the coil spring must start with wheel removal and tire removal followed by finger-tightening one lug nut for retaining the drum when drum retainers were taken off. Chlorinate the brake line from the wheel cylinder and break the brake line bracket bolt free from its position. The anti-lock brake sensor should be positioned aside by removing the ABS sensor bolt and bracket bolts when working on ABS-equipped vehicles. Secure the rear wheel knuckle before taking out the upper arm bolt and starting the process to loosen the lower arm bolt. You should now disconnect the lower shock nut and save it aside. Note the position of both the spring insulator and spring for correct installation before you remove the spring and lower the support to the wheel knuckle. The installation process ends with the return of removal steps along with brake system bleeding procedure.