FordParts
My Garage
My Account
Cart
OEM 2003 Ford Escape Seat Heater Switch
Seat Heater Level Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Seat Heater Switch found
2003 Ford Escape Switch Part Number: F85Z-14D694-AA
$45.80 MSRP: $72.73You Save: $26.93 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Switch Assembly; Seat Heater Switch; Power Seat Switch
- Base No.: 14D694
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-14D694-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Escape Seat Heater Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escape Seat Heater Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escape Seat Heater Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Escape Seat Heater Switch Parts Q&A
- Q: What Precautions Should Be Taken When Servicing the Seat Heater Switch to Ensure Safety and Proper Handling of Air Bag Components on 2003 Ford Escape?A: Wear safety glasses before servicing heated seat switch operations to protect from possible air bag incident injuries. Live side air bag modules should be handled by keeping the air bag and tear seam pointed in a direction that is away from your body at all times. It is prohibited to place a live module down on the cover tear seam during handling. Sodium hydroxide residue requires hand washing with soap and water after experiencing an air bag deployment. Probing the connectors through the air bag module leads to unwanted deployment of the system. Proper vehicle sensor alignment must be checked and the sensor mounting bracket along with wiring pigtail requires inspection for any signs of damage after a collision. All damaged SRS components need replacement regardless of air bag deployment. The technician must disconnect the ground cable from the battery while waiting at least one minute to drain back up power along with disconnecting any extra batteries when present. The restraint system diagnostic tool functions solely for service operations so it needs removal prior to vehicle driving. The diagnostic tool must be connected into the side air bag connector located at the floor connector to conduct side air bag system and safety belt pretensioner diagnostics. The diagnostic process needs to be restarted after reinstalling the original part if the problem remains unresolved. When side air bags activate the seatback pad along with trim cover and side air bag module should get replaced and seatback frame installation might become necessary. Start the removal procedure by disconnecting the ground cable of the battery before moving on to remove the seat control switch knob followed by the front seat cushion side shield and seat backrest handle and their associated screws and shield and electrical connector disconnections. First free the locking tab before extracting the heated seat switch then reinstall by following the previous steps backward.