FordParts
My Garage
My Account
Cart
OEM 2003 Ford Excursion Power Window Motor
Window Lift Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Power Window Motors found
2003 Ford Excursion Window Regulator, Front Passenger Side Part Number: 8C3Z-2523200-C
$133.22 MSRP: $181.29You Save: $48.07 (27%)Product Specifications- Other Name: Regulator And Motor Assembly - Window; Front Right Power Window Motor and Regulator.; Regulator Assembly
- Position: Front Passenger Side
- Replaces: 3C3Z-2523200-BA, 6C3Z-2523200-BA, YC3Z-1523394-AA, 6C3Z-2523200-BC, 7C3Z-2523200-A
- Base No.: 23200
- Item Weight: 6.80 Pounds
- Item Dimensions: 27.3 x 4.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2523200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Regulator And Motor Assembly - Window; Front Left Power Window Motor and Regulator.; Regulator Assembly
- Position: Front Driver Side
- Replaces: 6C3Z-2523201-BC, 7C3Z-7823395-A, YC3Z-1523395-AA, 7C3Z-2523201-BB
- Base No.: 23201
- Item Weight: 7.40 Pounds
- Item Dimensions: 27.0 x 4.1 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2523201-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Excursion Power Window Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Excursion Power Window Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Excursion Power Window Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Excursion Power Window Motor Parts Q&A
- Q: How to Service the Rear Door Power Window Motor on 2003 Ford Excursion?A: Start the rear door window motor servicing with a window switch removal then proceed to take out the rear door trim panel and the rear door trim watershield. First put the door speakers aside while you place tape on the window glass which needs to remain fully open. Place the electric drive connector of the window regulator inside the door after its disconnection from the system. Start by detaching the motor bolts before you can split the window regulator electric drive from the rear door and extract the electric drive from the door. Follow the reverse steps for installation of the parts after removal.