How to service the front ABS sensor on 2003 Ford Explorer?

Service of the front ABS sensor begins with disconnecting the battery ground cable. You should start by removing both the front wheel assembly with tire then proceed according to the specified component sequence. The front disc brake components should always stay off the brake hose when removed from service and mechanic's wire should be used for securing them. It is vital to create a match mark on the front disc before you start separating it from the front wheel hub flange. To reach the harness connector, drivers should lower the vehicle down first before accessing it. A hoist should lift the vehicle to enable removal of its harness retainers. The sensor ring function is embedded within the front wheel hub plus bearing assembly, which means it cannot receive maintenance. The installation process ends when you follow the reverse step of removal.

OEM 2003 Ford Explorer ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2003 Ford Explorer ABS Sensor, Front Driver Side Part Number: 4L2Z-2C204-C
$73.48 MSRP: $120.91
You Save: $47.43 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Front Speed Sensor
- Position: Front Driver Side
- Replaces: 3L2Z-2C204-AA, BRAB-12, 1L2Z-2C204-AC, BRAB-469, 3C5Z-2C204-AA, 4L2Z-2C204-B, BRAB-405, 4L2Z-2C204-A
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.5 x 10.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2C204-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Ford Explorer ABS Sensor, Rear Passenger Side Part Number: 2L2Z-2C190-AC
$96.47 MSRP: $131.28
You Save: $34.81 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Wheel Speed Sensor; Speed Sensor; Rear Speed Sensor
- Position: Rear Passenger Side
- Base No.: 2C190
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L2Z-2C190-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Ford Explorer ABS Sensor, Front Part Number: 6L5Z-2C204-BA
$53.37 MSRP: $87.82
You Save: $34.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: 3L5Z-2C204-BA
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 19.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2C204-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS

2003 Ford Explorer ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Explorer ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Explorer ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Explorer ABS Sensor Parts Q&A

Q: How to service the front ABS sensor on 2003 Ford Explorer?
A: Service of the front ABS sensor begins with disconnecting the battery ground cable. You should start by removing both the front wheel assembly with tire then proceed according to the specified component sequence. The front disc brake components should always stay off the brake hose when removed from service and mechanic's wire should be used for securing them. It is vital to create a match mark on the front disc before you start separating it from the front wheel hub flange. To reach the harness connector, drivers should lower the vehicle down first before accessing it. A hoist should lift the vehicle to enable removal of its harness retainers. The sensor ring function is embedded within the front wheel hub plus bearing assembly, which means it cannot receive maintenance. The installation process ends when you follow the reverse step of removal.