How to Safely Service and Repair a Fuel Pressure Sensor on 2003 Ford Focus?

Service of the fuel tank pressure sensor begins with removing the tank but always disconnect the electrical connector before lowering to avoid damaging equipment. A proper disconnection of the fuel tank pressure sensor requires pressing down while rotating it counterclockwise from the fuel tank. Install the fuel tank pressure sensor by putting it in place above the grommet while applying pressure before turning it clockwise to protect the parts from damage. A leak test followed by the evaporative emission repair verification drive cycle must be done to validate proper system performance after installation. It is necessary to follow fuel handling procedures because flammable vapor emissions exist during the operation.

OEM 2003 Ford Focus Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Pressure Sensors found

View related parts
2003 Ford Focus Fuel Pressure Regulator Part Number: 3R3Z-9F972-AB
$102.32 MSRP: $168.36
You Save: $66.04 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Sensor
- Replaces: 3R3Z-9F972-AA, F8CZ-9F972-BE, XW4Z-9F972-BA
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3R3Z-9F972-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Focus Submodels:
- LX, SE, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2003 Ford Focus Pressure Sensor Part Number: XS4Z-9C052-AA
$80.55 MSRP: $132.55
You Save: $52.00 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor
- Replaces: XS4Z-9F479-AA, F87Z-9C052-AA, F75Z-9C052-AA
- Base No.: 9F479
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS4Z-9C052-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2003 Ford Focus Pressure Sensor Part Number: XS2Z-9F972-GB
Product Specifications
- Other Name: Sensor - Fuel Injection; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor - Fuel Injector Pressure
- Manufacturer Note: Sensor asy. (Fuel pressure) #XS2F 9F972-GB
- Replaces: XS4Z-9F972-DA, XS2Z-9F972-GA
- Base No.: 9F972
- Item Weight: 0.30 Pounds
- Item Dimensions: 11.7 x 10.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS2Z-9F972-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2003 Ford Focus Fuel Pressure Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Focus Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Focus Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Focus Fuel Pressure Sensor Parts Q&A

Q: How to Safely Service and Repair a Fuel Pressure Sensor on 2003 Ford Focus?
A: Service of the fuel tank pressure sensor begins with removing the tank but always disconnect the electrical connector before lowering to avoid damaging equipment. A proper disconnection of the fuel tank pressure sensor requires pressing down while rotating it counterclockwise from the fuel tank. Install the fuel tank pressure sensor by putting it in place above the grommet while applying pressure before turning it clockwise to protect the parts from damage. A leak test followed by the evaporative emission repair verification drive cycle must be done to validate proper system performance after installation. It is necessary to follow fuel handling procedures because flammable vapor emissions exist during the operation.