FordParts
My Garage
My Account
Cart
OEM 2003 Ford Mustang EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 EGR Valves found
2003 Ford Mustang EGR Valve Part Number: XL3Z-9D475-BA
$57.70 MSRP: $93.09You Save: $35.39 (39%)Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid; EGR
- Replaces: F6AZ-9D475-BA, XF2Z-9D475-EA, XR3Z-9D475-CA, F65Z-9D475-A, XR3Z-9D475-DA
- Base No.: 9D475
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.2 x 3.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Mustang EGR Valve Part Number: XL3Z-9D475-A
$82.55 MSRP: $131.09You Save: $48.54 (38%)Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: XL3Z-9D475-DA
- Base No.: 9D475
- Item Weight: 0.20 Pounds
- Item Dimensions: 4.3 x 3.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9D475-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Mustang EGR Valve Part Number: XW4Z-9D475-AB
Product Specifications- Other Name: Valve - Exhaust Gas; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid; Valve - Exhaust Gas Recirculation
- Manufacturer Note: Valve asy. (EGR) #XW4E 9D475-A2B
- Replaces: YS4Z-9D475-BB
- Base No.: 9D475
- Item Weight: 0.20 Pounds
- Item Dimensions: 4.2 x 3.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9D475-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Mustang EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Mustang EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Mustang EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Mustang EGR Valve Parts Q&A
- Q: How to service and repair the EGR valve on the Cobra on 2003 Ford Mustang?A: The initial step for servicing or repairing the EGR valve of a Cobra involves disconnecting both accelerator cable and speed control cable followed by removing the accelerator cable bracket bolts. Pushing the clip allows positioning the accelerator cable bracket and cables for adequate clearance. The service continues with electrical connector removal from the fuel pulse damper, EGR vacuum regulator solenoid, supercharger bypass vacuum solenoid and differential pressure feedback EGR system. The maintenance procedure requires detaching vacuum hoses that lead to the differential pressure feedback EGR system and the supercharger bypass vacuum solenoid, the actuator, the fuel pulse damper, and the EGR vacuum regulator solenoid, plus the vacuum hose from the EGR valve. Disconnect all vacuum hoses at the back of the supercharger then set the vacuum harness to the side. Unfasten the vacuum accessory bracket mounting nut and subsequently detach the mounting bolts and vacuum accessory bracket. First disconnect the exhaust manifold to EGR valve tube then remove its mounting bolts before taking out the EGR valve and discarding the EGR valve gasket. The installation should be conducted in reverse order following removal steps but a replacement gasket of the EGR valve must be used.