My Garage
Cart

OEM 2003 Ford Windstar Heater Core

HVAC Heater Core
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Heater Cores found

  • 2003 Ford Windstar Heater Core - H2MZ-18476-W
    2003 Ford Windstar Heater Core Diagram - H2MZ-18476-W
    View related parts

    2003 Ford Windstar Heater Core
    Part Number: H2MZ-18476-W

    $53.53 MSRP: $74.05
    You Save: $20.52 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Heater Assembly - Less Radiator
    • Replaces: F68Z-18476-AA, HC-24, XF2Z-18476-AA
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: H2MZ-18476-W
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following 2003 Ford Windstar Submodels:
    • 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
  • 2003 Ford Windstar Heater Core - H2MZ-18476-X
    2003 Ford Windstar Heater Core Diagram - H2MZ-18476-X
    View related parts
    Product Specifications
    • Other Name: Heater Assembly - Less Radiator; HVAC Heater Core, Rear; HVAC Heater Core
    • Position: Rear
    • Replaces: 1L2Z-18476-CA, HC-32, HC-25, F85Z-18476-AA, HC-22
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 9.3 x 2.9 x 12.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: H2MZ-18476-X
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Windstar Submodels:
    • 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2003 Ford Windstar Heater Core

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Windstar Heater Core available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Windstar Heater Core as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Windstar Heater Core Parts Questions & Experts Answers

  • Q: How to service and repair the heater core on 2003 Ford Windstar?
    A: A proper repair or service of the heater core follows the steps of draining the cooling system before removing the cowl top vent panel. Beginning with heater hose disconnection then proceed to take out the lower instrument panel utility compartment along with the ash receptacle and rear seat airflow duct by removing pins and duct. Service and repair of the heater core starts with removing four instrument panel support bolts followed by disconnecting electrical connectors and detached center instrument panel support bracket using nuts. The installer should start by taking off the support brace bolts then move to the floor duct screws and finish by removing the cover screws and cover. You will need to eliminate the dash panel seal before you can gain access to and remove the heater core component. To reinstall reverse the steps of removal while applying MERPOL(R) meeting Ford specification ESE-M99B144-B or plain water on coolant hoses as needed.

Related 2003 Ford Windstar Parts