FordParts
My Garage
My Account
Cart
OEM 2003 Ford Windstar Motor And Transmission Mount
Motor and Trans Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Motor And Transmission Mounts found
2003 Ford Windstar Front Mount, Driver Side Part Number: XF2Z-6038-AA
Product Specifications- Other Name: Insulator Assembly; Engine Mount Isolator, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator
- Position: Front Driver Side
- Base No.: 6038
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Windstar Transmission Mount Part Number: F5OY-6F063-A
Product Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator
- Base No.: 6F063
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5OY-6F063-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Insulator Assembly - Engine Support; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator
- Position: Rear Passenger Side
- Replaces: 1F2Z-6068-AA
- Base No.: 6068
- Item Weight: 4.90 Pounds
- Item Dimensions: 8.1 x 4.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Windstar Motor And Transmission Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Windstar Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Windstar Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Windstar Motor And Transmission Mount Parts Q&A
- Q: How to Service and Repair the Motor and Transmission Mount on 2003 Ford Windstar?A: The transmission mount service starts with vehicle elevation then wheel removal of the left-hand side wheel and tire. You should set a high lift transmission jack beneath the transaxle. The service begins by undoing the engine and transaxle upper support insulator nut before removing its bracket bolts and both the bracket and insulator. Before starting remove the insulator bolts along with the insulator itself. The installation procedure begins with position of the engine and transaxle support insulator before tightening its bolts. First reinstall the engine and transaxle upper support insulator nut before installing both the engine and transaxle upper support bracket along with its bolts. Lower the vehicle first before installing the LH wheel with its tire and eventually removing the high lift transmission jack.