How to service the front ABS sensor and sensor ring on 2003 Lincoln LS?

Service of the front ABS sensor and its ring requires moving the vehicle into neutral position on a hoist. The installation process begins by performing component removal in the described order and ends with the reverse installation steps. Before uninstalling the ABS sensor harness, you should set aside the inner splash shield while using pin-type retainers. The connection of ABS sensor electrical wiring needs disconnection and the ABS sensor harness needs unclipping. The ABS sensor ring stays within the wheel hub assembly, thus it cannot get service independently. Sealant application on the ABS sensor outer diameter must be performed with a 2.5 mm (0.1 inch) bead before fully seating the sensor before new clip installation.

OEM 2003 Lincoln LS ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2003 Lincoln LS ABS Sensor, Front Driver Side Part Number: 3W4Z-2C204-AA
$37.40 MSRP: $61.09
You Save: $23.69 (39%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Snap On Type
- Position: Front Driver Side
- Replaces: YW4Z-2C204-BB
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.9 x 10.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3W4Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln LS Submodels:
- Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
2003 Lincoln LS ABS Sensor, Rear Passenger Side Part Number: 3W4Z-2C190-BA
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: XW4Z-2C190-AA
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.0 x 8.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-2C190-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2003 Lincoln LS ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln LS ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln LS ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Lincoln LS ABS Sensor Parts Q&A

Q: How to service the front ABS sensor and sensor ring on 2003 Lincoln LS?
A: Service of the front ABS sensor and its ring requires moving the vehicle into neutral position on a hoist. The installation process begins by performing component removal in the described order and ends with the reverse installation steps. Before uninstalling the ABS sensor harness, you should set aside the inner splash shield while using pin-type retainers. The connection of ABS sensor electrical wiring needs disconnection and the ABS sensor harness needs unclipping. The ABS sensor ring stays within the wheel hub assembly, thus it cannot get service independently. Sealant application on the ABS sensor outer diameter must be performed with a 2.5 mm (0.1 inch) bead before fully seating the sensor before new clip installation.