How to service the front antenna cable on 2003 Lincoln Navigator?

The service process for front antenna lead-in cable starts by taking off both right-hand scuff plate and right-hand A-pillar lower trim panel. Two pin-type retainers which are located at the lower A-pillar need to be disconnected before removing the rear antenna lead-in cable from the front antenna lead-in cable. Keep in mind that the antenna serves as a vital part of the wiring harness because you cannot replace it alone so remove the ends of the old antenna cable before taping the remaining portion to the wiring harness to block noises. Complete installation of the new antenna cable involves using tape or wires to attach it to the wiring harness for noise reduction purposes before performing the reverse order of removal steps.

OEM 2003 Lincoln Navigator Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2003 Lincoln Navigator Antenna Cable
Part Number: 2L1Z-18812-DA
$16.22 MSRP: $22.07
You Save: $5.85 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Base No.: 18812B
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.2 x 9.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-18812-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2003 Lincoln Navigator Antenna Cable, Front
Part Number: 2L1Z-18812-CB
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Manufacturer Note: Attaches To Radio Receiver
- Position: Front
- Base No.: 18812A
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.6 x 5.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-18812-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
2003 Lincoln Navigator Antenna Cable
Part Number: 2L1Z-18812-EA
Product Specifications
- Other Name: Cable Assembly - Extension; GPS Navigation System Antenna Cable; Cable Assembly
- Base No.: 18812B
- Item Weight: 5.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-18812-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2003 Lincoln Navigator Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Navigator Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Navigator Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Lincoln Navigator Antenna Cable Parts Questions & Experts Answers

Q: How to service the front antenna cable on 2003 Lincoln Navigator?
A: The service process for front antenna lead-in cable starts by taking off both right-hand scuff plate and right-hand A-pillar lower trim panel. Two pin-type retainers which are located at the lower A-pillar need to be disconnected before removing the rear antenna lead-in cable from the front antenna lead-in cable. Keep in mind that the antenna serves as a vital part of the wiring harness because you cannot replace it alone so remove the ends of the old antenna cable before taping the remaining portion to the wiring harness to block noises. Complete installation of the new antenna cable involves using tape or wires to attach it to the wiring harness for noise reduction purposes before performing the reverse order of removal steps.