FordParts
My Garage
My Account
Cart
OEM 2003 Lincoln Town Car Drive Shaft
Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Drive Shafts found
2003 Lincoln Town Car Drive Shaft Part Number: 6W1Z-4602-B
Product Specifications- Other Name: Shaft Assembly - Drive; Driveshaft; Drive Shaft Assembly
- Replaces: 3W1Z-4602-BA, 5W1Z-4602-B
- Base No.: 4602
- Item Weight: 33.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-4602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln Town Car Drive Shaft Part Number: 6W1Z-4602-A
Product Specifications- Other Name: Shaft Assembly - Drive; Driveshaft; Drive Shaft Assembly
- Replaces: 5W1Z-4602-A, 3W1Z-4602-CA
- Base No.: 4602
- Item Weight: 32.30 Pounds
- Item Dimensions: 25.4 x 6.0 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln Town Car Drive Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Town Car Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Town Car Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Lincoln Town Car Drive Shaft Parts Q&A
- Q: How to Service and Repair the Drive Shaft on 2003 Lincoln Town Car?A: Service and repair the driveshaft from a hoist with proper index-marking applied to the driveshaft centering socket yoke and the rear axle pinion flange along with the driveshaft and transmission extension housing. Unscrew the four bolts by using the specified tool for prying in a designated area instead of hitting the driveshaft to remove the yoke from the flange. The rear end of the driveshaft should be lowered until it passes the rear axle housing while pulling it backward until the slip yoke frees the transmission extension housing. At this point tape or plug the extension housing to stop fluid from escaping. You should replace all bolts yet if new bolts are unavailable then apply Threadlock and Sealer onto the original bolt threads. The driveshaft centering socket yoke needs to be properly centered on the rear axle pinion flange which will be achieved through equal bolt tightening according to a cross pattern. Inspect the extension housing seal for damage then replace it with an entirely new one when needed and apply Premium Long-Life Grease to the slip-yoke spline. Installation of new driveshafts requires that workers match the yellow paint marks at the rear of the tube to the corresponding marks on the pinion flange; driveshaft indexing will be needed if these marks cannot be seen. The installation process ends with the inverse actions of removal.