Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2003 Lincoln Town Car Submodels:
Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
2003 Lincoln Town Car Seat Belt
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Town Car Seat Belt available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Town Car Seat Belt as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Lincoln Town Car Seat Belt Parts Questions & Experts Answers
Q: What safety precautions should be taken when servicing an undeployed scrapped seat belt system on 2003 Lincoln Town Car?
A: Safety glasses are required during seat belt system maintenance of undeployed scrapped vehicles to defend against possible air bag accidents. When handling the safety belt retractor/pretensioner assembly keep all movable components and fingers and clothes at a safe distance from its parts. Remote deployment requires open-air conditions and personnel must keep at least 6.1 meters (20 feet) apart from each other while the operation is ongoing since loud noise will occur. Safety hearing protection is mandatory. Detach and securely cut the electrical connector from the vehicle before peeling 25 mm (1 inch) of wire insulation. Two wires should be at least 20-gauge with each length of 6.1 meters (20 feet) to serve as connectors for security belt pretensioner wires. Setting the assembly flat on an open area requires enough space to prevent movable parts from contact with the ground. The safety belt pretensioner deployment requires at least 6.1 meters (20 feet) of separation from the assembly while the wire ends must connect to a 12-volt battery system. The assembly requires at least ten minutes of cooling time before approaching it after deployment. Standard scrapping procedures should be followed when disposing of the deployed safety belt retractor/pretensioner assembly.