FordParts
My Garage
My Account
Cart
OEM 2003 Mercury Marauder Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Shock Absorbers found
2003 Mercury Marauder Shock Absorber, Gray/Red, Rear Part Number: 8W7Z-18125-D
$77.11 MSRP: $129.45You Save: $52.34 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 4W3Z-18125-AA, 6W7Z-18125-D, 6W1Z-18125-A, 7W7Z-18125-D, 8W3Z-18125-A, 8W7Z-18125-B, ASH-1152, ASH-24537, ASH-711, 7W1Z-18125-A, ASH-12275, 3W7Z-18125-GA, 4W7Z-18125-DA, 3U2Z-18125-AC, 7W3Z-18125-H, 8W7Z-18125-C, ASH-24538, ASH-1038, ASH-24536, ASH-267, ASH-1041
- Base No.: 18125
- Item Weight: 5.10 Pounds
- Item Dimensions: 27.0 x 3.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-18125-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Marauder Shock Absorber Part Number: 7W3Z-18124-J
Product Specifications- Other Name: Shock Absorber Assembly; Strut
- Replaces: 3U2Z-18124-BH, ASH-1153, ASH-695, 4W3Z-18124-AA, 7W3Z-18124-H
- Base No.: 18124
- Item Weight: 7.20 Pounds
- Item Dimensions: 21.9 x 5.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7W3Z-18124-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Mercury Marauder Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Mercury Marauder Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Mercury Marauder Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Mercury Marauder Shock Absorber Parts Q&A
- Q: What are the important considerations when servicing rear shock absorbers on 2003 Mercury Marauder?A: All vehicles come with gas-pressured shock absorbers that will automatically extend during service thus applying heat or flame to the shock absorber tube must be avoided. Shock absorbers can be installed independently from one another when only one is required for replacement. Enable the vehicle's air suspension service switch to maintain control over unexpected air spring change while the vehicle is being hoisted or towed. Securely support the vehicle by applying it to an elevated height before disabling the air suspension service switch. The reaction requires a proper jack system to maintain the rear axle during maintenance. Disassemble the shock absorber by first removing its nut while discarding both the nut and washer. After unfastening the shock absorber with its bolt and nut you should remove those components and discard the bolts. The installation process requires following the opposite order of removal steps.