OEM 2004 Ford E-150 Door Lock Cylinder

2004 Ford E-150 Door Lock Cylinder Parts Questions & Experts Answers

• Q: How should a new door lock cylinder be installed to avoid carrying an extra key on 2004 Ford E-150?

  A: It is necessary to install door lock cylinder and ignition lock cylinder as a set during replacement since running separate keys for different locks can become troublesome. A new key purchase comes with a metal tag containing the new key code number for identification. Individual lock cylinder repairs require users to replace the faulty unit with a new assembly obtained from a proper lock repair package. These packages will provide complete instructions to match the new lock cylinder to active key code information. The lock cylinder removal starts by removing door trim panels only when they exist. The procedure for replacing both side and front door lock cylinders starts with disconnecting the lock rod and then removing the retainers followed by unlocking the cylinder. Rear door license plate housing screws must be removed first before directing the housing out of the door path and disconnecting the lock cylinder rod and door latch cable to access the retainer and lock cylinder. Before removing sliding door speakers the speaker needs a cable disconnect and screw removal followed by disconnecting the electrical connector. The retainer along with the lock cylinder needs to be removed after disconnecting the lock cylinder rod. The installation of the new lock cylinder requires you to execute the reverse steps used for all door removals.