How to service and repair a brake caliper on 2004 Ford F-350 Super Duty?

The first step to service or repair a brake caliper starts with supporting the vehicle by lifting it and removing the wheel combined with its tire. The hazard of inhaling asbestos fiber dust exists because it can be found on brake and clutch assemblies so work with vacuums equipped for asbestos while following OSHA label and bag sealing requirements. In case a vacuum cleaner for asbestos dust cleanup is not available you should clean with wet cloths along with the use of toxic dust purifying respirators approved by the government. Technicians who maintain brakes and clutches can enter areas with warning signs because they are the only workers who should access locations where asbestos dust formation can occur. Detach the brake hose by removing its brake hose bolt before disconnecting and removing the washers while plugging the brake hose for later use. To remove the caliper secure first the caliper pin bolts before lifting the device from its anchor plate. A test for leaks will determine whether caliper disassembly is needed. Install the disc brake caliper at its designated position before fixing it with caliper pin bolts. Fasten the brake hose in position with brand new copper washers while installing the brake hose bolt. Bleed the brake system before you reinstall the wheel along with tire assets while refilling the brake master cylinder reservoir with new DOT 3 motor vehicle brake fluid before putting the cap back in place. Brake system functioning should be examined to verify proper operation during the last inspection step.

OEM 2004 Ford F-350 Super Duty Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2004 Ford F-350 Super Duty Caliper, Driver Side Part Number: YC3Z-2553-AA
$82.60 MSRP: $136.91
You Save: $54.31 (40%)
ADD TO CART
Product Specifications
- Other Name: Caliper With Pads; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Driver Side
- Base No.: 2553
- Item Weight: 17.00 Pounds
- Item Dimensions: 4.7 x 7.7 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-2553-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2004 Ford F-350 Super Duty Caliper, Front Driver Side Part Number: 3C3Z-2B121-AA
$111.65 MSRP: $181.64
You Save: $69.99 (39%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Driver Side
- Base No.: 2B121
- Item Weight: 16.80 Pounds
- Item Dimensions: 4.6 x 7.4 x 12.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-2B121-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2004 Ford F-350 Super Duty Caliper, Front Passenger Side Part Number: 3C3Z-2B120-AA
$113.85 MSRP: $181.64
You Save: $67.79 (38%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 16.90 Pounds
- Item Dimensions: 4.7 x 7.4 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-2B120-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2004 Ford F-350 Super Duty Caliper, Front Passenger Side Part Number: 8U9Z-2B120-AA
$124.87 MSRP: $205.45
You Save: $80.58 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: RH/LH
- Position: Front Passenger Side
- Replaces: YC3Z-2B120-GA, YC3Z-2B120-EC, F81Z-2B120-AA, YC3Z-2B120-GB
- Base No.: 2B120
- Item Weight: 20.90 Pounds
- Item Dimensions: 9.5 x 9.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8U9Z-2B120-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2004 Ford F-350 Super Duty Caliper, Front Driver Side Part Number: 8U9Z-2B121-AB
$125.97 MSRP: $207.27
You Save: $81.30 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left, Rear Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Replaces: 8U9Z-2B121-AA, F81Z-2B121-AA, YC3Z-2B121-BA, YC3Z-2B121-BB, YC3Z-2B121-AC
- Base No.: 2B120
- Item Weight: 19.40 Pounds
- Item Dimensions: 10.4 x 7.2 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8U9Z-2B121-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2004 Ford F-350 Super Duty Caliper Part Number: YC3Z-2552-AA
$92.76 MSRP: $145.64
You Save: $52.88 (37%)
Product Specifications
- Other Name: Caliper With Pads; Disc Brake Caliper, Rear Left, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Base No.: 2552
- Item Weight: 17.80 Pounds
- Item Dimensions: 4.5 x 7.4 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-2552-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2004 Ford F-350 Super Duty Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford F-350 Super Duty Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford F-350 Super Duty Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford F-350 Super Duty Brake Caliper Parts Q&A

Q: How to service and repair a brake caliper on 2004 Ford F-350 Super Duty?
A: The first step to service or repair a brake caliper starts with supporting the vehicle by lifting it and removing the wheel combined with its tire. The hazard of inhaling asbestos fiber dust exists because it can be found on brake and clutch assemblies so work with vacuums equipped for asbestos while following OSHA label and bag sealing requirements. In case a vacuum cleaner for asbestos dust cleanup is not available you should clean with wet cloths along with the use of toxic dust purifying respirators approved by the government. Technicians who maintain brakes and clutches can enter areas with warning signs because they are the only workers who should access locations where asbestos dust formation can occur. Detach the brake hose by removing its brake hose bolt before disconnecting and removing the washers while plugging the brake hose for later use. To remove the caliper secure first the caliper pin bolts before lifting the device from its anchor plate. A test for leaks will determine whether caliper disassembly is needed. Install the disc brake caliper at its designated position before fixing it with caliper pin bolts. Fasten the brake hose in position with brand new copper washers while installing the brake hose bolt. Bleed the brake system before you reinstall the wheel along with tire assets while refilling the brake master cylinder reservoir with new DOT 3 motor vehicle brake fluid before putting the cap back in place. Brake system functioning should be examined to verify proper operation during the last inspection step.