FordParts
My Garage
My Account
Cart
OEM 2004 Mercury Marauder Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Pads found
2004 Mercury Marauder Brake Pads, Rear Part Number: 4U2Z-2V200-CA
$44.51 MSRP: $66.65You Save: $22.14 (34%)Ships in 1 Business DayProduct Specifications- Other Name: Kit - Brake Shoe And Lining; Disc Brake Pad Set, Rear; Rear Pads
- Position: Rear
- Replaces: 4W1Z-2200-AA, 6W1Z-2200-AA, BRF-1040
- Base No.: 2200
- Item Weight: 3.00 Pounds
- Item Dimensions: 2.6 x 5.5 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V200-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Marauder Brake Pads, Front Part Number: 4U2Z-2V001-A
$46.59 MSRP: $66.65You Save: $20.06 (31%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: 3W1Z-2001-AA, BR-931-B, 4U2Z-2V001-BA, 6W1Z-2001-A, BRF-931-A, G2MZ-2V001-Z
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.8 x 5.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Marauder Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Marauder Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Marauder Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Mercury Marauder Brake Pads Parts Q&A
- Q: How to service the rear brake pads on 2004 Mercury Marauder?A: Start the rear brake pad service by removing both wheel and tire from their current position. Keep the caliper away from the brake hose to prevent damage before you can take out the bolts for lifting the caliper off the anchor plate. The brake pads must remain protected from grease, oil, brake fluid together with any other possible contaminant. You should remove brake pads through an inward push and an upward rotation of the pad. Before retracting the caliper piston into the rear brake caliper protect the piston and boots by using a block of wood with a pad or substantial pad. The installation of new pads requires reversing the pad removal steps while checking brake operation effectiveness after holding the slippers in clean condition.