How to Service and Repair the Rear Two-Piece Drive Shaft on 2005 Ford E-250?

Service and repair jobs on the rear two-piece driveshaft begin by properly raising the vehicle while it remains supported. Mark the driveshaft according to the pinion flange on the rear axle followed by removing four bolts that disconnect and remove the rear driveshaft section. The support brackets installed on the coupling shaft need removal at that point while keeping the parking brake active. When servicing E-450 models it is necessary to disconnect the coupling shaft bolts from the parking brake assembly through the removal of four U-joint retainer bolts. Requires a new parking brake assembly output flange then you should disconnect the assembly from the coupling shaft. Place the driveshaft according to its index marks before attaching U-joint caps and bolts then release the parking brake. After supporting the coupling shaft position the center bearing and bracket before threading in the center bearing bracket bolts. Begin with installing the rear driveshaft section while aligning its index marks then fasten all four driveshaft-to-rear axle bolts after you seal the threads of original bolts when new ones cannot be used. Shifting to the last phase involves both support removal and lowering the vehicle.

OEM 2005 Ford E-250 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Shafts found

View related parts
2005 Ford E-250 Drive Shaft
Part Number: 5C2Z-4602-H
$586.13 MSRP: $801.54
You Save: $215.41 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5C2Z-4602-CA
- Base No.: 4602
- Item Weight: 37.80 Pounds
- Item Dimensions: 25.2 x 6.0 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-4602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-250 Drive Shaft
Part Number: AC2Z-4R602-D
$1037.25 MSRP: $1418.46
You Save: $381.21 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft; Drive Shaft Assembly
- Replaces: 5C2Z-4R602-DA
- Base No.: 4R602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-4R602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-250 Drive Shaft, Rear
Part Number: 5C2Z-4602-K
$712.13 MSRP: $973.85
You Save: $261.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 3C2Z-4602-MA, 5C2Z-4602-B
- Base No.: 4602
- Item Weight: 27.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-4602-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Ford E-250 Drive Shaft
Part Number: AC2Z-4R602-E
$850.16 MSRP: $1162.62
You Save: $312.46 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft; Drive Shaft Assembly
- Replaces: 5C2Z-4R602-AA
- Base No.: 4R602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-4R602-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-250 Drive Shaft, Rear
Part Number: 5C2Z-4602-J
$736.31 MSRP: $1006.92
You Save: $270.61 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 5C2Z-4602-A, 3C2Z-4602-AA
- Item Weight: 24.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-4602-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-250 Drive Shaft
Part Number: 4L2Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Dimensions: 48.9 x 9.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-4602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS

2005 Ford E-250 Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford E-250 Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford E-250 Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford E-250 Drive Shaft Parts Questions & Experts Answers

Q: How to Service and Repair the Rear Two-Piece Drive Shaft on 2005 Ford E-250?
A: Service and repair jobs on the rear two-piece driveshaft begin by properly raising the vehicle while it remains supported. Mark the driveshaft according to the pinion flange on the rear axle followed by removing four bolts that disconnect and remove the rear driveshaft section. The support brackets installed on the coupling shaft need removal at that point while keeping the parking brake active. When servicing E-450 models it is necessary to disconnect the coupling shaft bolts from the parking brake assembly through the removal of four U-joint retainer bolts. Requires a new parking brake assembly output flange then you should disconnect the assembly from the coupling shaft. Place the driveshaft according to its index marks before attaching U-joint caps and bolts then release the parking brake. After supporting the coupling shaft position the center bearing and bracket before threading in the center bearing bracket bolts. Begin with installing the rear driveshaft section while aligning its index marks then fasten all four driveshaft-to-rear axle bolts after you seal the threads of original bolts when new ones cannot be used. Shifting to the last phase involves both support removal and lowering the vehicle.