FordParts
My Garage
My Account
Cart
OEM 2005 Ford Escape Fuel Pressure Sensor
Fuel Tank Pressure Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fuel Pressure Sensor found
2005 Ford Escape Pressure Sensor Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27You Save: $54.63 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Base No.: 9F972
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-9G756-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Escape Fuel Pressure Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Escape Fuel Pressure Sensor Parts Q&A
- Q: What Safety Precautions Should Be Followed When Servicing the Fuel Pressure Sensor on the Fuel Rail on 2005 Ford Escape?A: Safety measures must always be followed when servicing the fuel rail pressure and temperature sensor because highly volatile fuel mixtures exist near all fuel components. Open flames and smoking activities must be forbidden from the work area. Any fuel tubes or components must be disconnected only after the fuel system pressure is relieved since the system maintains pressure even when the engine shuts off. The first step involves draining fuel system pressure and the second step calls for unclipping the battery ground wire. Remove the fuel rail pressure and temperature sensor by disconnecting its electrical connector along with its vacuum tube. Unfasten the two sensor retaining bolts. Install new O-ring seals only if necessary and use 5 Nm (44 lb-in) force when tightening the bolts during installation of the sensor. Add lubricating oil to the new O-ring seal before reversing the installation steps for completing the assembly.