OEM 2005 Ford Expedition Air Suspension Compressor

2005 Ford Expedition Air Suspension Compressor Parts Q&A

• Q: How to service and repair the air suspension compressor on 2005 Ford Expedition?

  A: The service and repair process for the air suspension compressor starts with unfastening the air suspension relay from its bracket and continuing with the windshield washer pump and reservoir extraction. Start by pushing the orange lock ring of the quick-connect toward the compressor then extract the outlet from the air drier. First disconnect the air compressor electrical connector before removing its bracket bolts to withdraw the air compressor/drier assembly. It is possible to discard the bracket after air compressor detachment by first removing screws and washers and three rubber isolators alongside the bracket screws. Detach the silencer by taking out all its securing screws. To achieve correct installation of the air lines always fully insert the white air line into its fitting. Double-check bracket installation by making sure no objects are underneath it or resting on it and verify the air compressor has safe spacing with nearby parts to reduce noise creation while making sure the compressor operates without resistance in the rubber isolators. The bracket installation should include verification that it does not have any deformities which could force rubber isolators to interfere with one another. Install new fasteners obtained in the kit when using new brackets.