How to service and repair the front sway bar kit and sway bar link on an F250 on 2005 Ford F-250 Super Duty?

The first step to deal with sway bar link maintenance on an F250 starts with placing the vehicle in neutral and mounting it on a hoist. Proceed with removing nuts and washers from the lower ends of the sway bar links before moving to the upper ends where links connect to the frame to extract the links. You need to take away the nuts from the sway bar kit retainer-to-axle brackets to disconnect the sway bar kit retainers as well as sway bar kit mounting brackets and U-bolts and sway bar kit. The reverse order of installation should be followed while using new fasteners and maintaining the torque specifications to ensure all components stay properly attached because suspension fasteners manage vital systems thus their failure results in high service expenses. New components must receive installation of parts with matching numbers or their equivalent rather than receiving lower quality substitute designs.

OEM 2005 Ford F-250 Super Duty Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
2005 Ford F-250 Super Duty Stabilizer Bar, Front Part Number: 5C3Z-5482-DA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Base No.: 5482
- Item Weight: 20.00 Pounds
- Item Dimensions: 10.5 x 4.0 x 31.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5482-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2005 Ford F-250 Super Duty Stabilizer Bar, Front Part Number: F81Z-5482-BA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: Front stabilizer, DRW , twin I,beam , Wide Frame WB (Raised over Axle), 24mm dia bar , Yellow ID
- Position: Front
- Base No.: 5482
- Item Weight: 13.50 Pounds
- Item Dimensions: 10.2 x 4.0 x 32.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-5482-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford F-250 Super Duty Stabilizer Bar, Rear Part Number: 5C3Z-5A772-AA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Base No.: 5A772
- Item Weight: 19.40 Pounds
- Item Dimensions: 10.2 x 4.1 x 31.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5A772-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2005 Ford F-250 Super Duty Stabilizer Bar, Front Part Number: 5C3Z-5482-CA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Base No.: 5482
- Item Weight: 10.10 Pounds
- Item Dimensions: 45.5 x 3.3 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5482-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2005 Ford F-250 Super Duty Stabilizer Bar, Rear Part Number: 5C3Z-5A772-EA
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Base No.: 5A772
- Item Weight: 19.60 Pounds
- Item Dimensions: 10.4 x 4.1 x 31.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-5A772-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

2005 Ford F-250 Super Duty Sway Bar Kit

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-250 Super Duty Sway Bar Kit available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-250 Super Duty Sway Bar Kit as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-250 Super Duty Sway Bar Kit Parts Q&A

Q: How to service and repair the front sway bar kit and sway bar link on an F250 on 2005 Ford F-250 Super Duty?
A: The first step to deal with sway bar link maintenance on an F250 starts with placing the vehicle in neutral and mounting it on a hoist. Proceed with removing nuts and washers from the lower ends of the sway bar links before moving to the upper ends where links connect to the frame to extract the links. You need to take away the nuts from the sway bar kit retainer-to-axle brackets to disconnect the sway bar kit retainers as well as sway bar kit mounting brackets and U-bolts and sway bar kit. The reverse order of installation should be followed while using new fasteners and maintaining the torque specifications to ensure all components stay properly attached because suspension fasteners manage vital systems thus their failure results in high service expenses. New components must receive installation of parts with matching numbers or their equivalent rather than receiving lower quality substitute designs.