OEM 2005 Ford Mustang Washer Reservoir

2005 Ford Mustang Washer Reservoir Parts Questions & Experts Answers

• Q: How to service the windshield washer reservoir and pump on 2005 Ford Mustang?

  A: You should begin windshield washer pump and reservoir servicing on a vehicle positioned on a hoist in NEUTRAL mode. Before servicing the windshield washer pump users must disconnect the electrical connector and drain the windshield washer solvent through the hose. The washer pump should be taken off its mounting bracket. When installing or removing the washer fluid reservoir you must disconnect its two bolts before tightening them to 6 Nm (53 lb-in). Take out the windshield washer reservoir by loosening its nut and following it with reservoir removal while tightening both to 6 Nm (53 lb-in). Operating the windshield washer pump must be avoided at all times until the reservoir receives its fill. The service completion requires performing the reverse procedure to reinstall all components. When working with windshield washer solution handle it with respect as methanol inside is both hazardous and combustible.