FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2005 Lincoln Aviator Cable Assembly Part Number: 4C5Z-14300-AA
Product Specifications- Other Name: Battery Cables; Positive Cable
- Manufacturer Note: Complete Asy., Includes Positive & Negative Battery Cables And A/C, Alternator & Starter Motor Cables
- Base No.: 14300
- Item Weight: 4.40 Pounds
- Item Dimensions: 4.2 x 12.5 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C5Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Positive Cable Part Number: 5C5Z-14300-AA
Product Specifications- Other Name: Cable Assembly; Battery Cables
- Base No.: 14300
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.1 x 13.7 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C5Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Battery Cable Parts Q&A
- Q: How to service the battery cable on 2005 Lincoln Aviator?A: Service operations on the battery cable require a vehicle in neutral position along with placement on a hoist. Detach the battery power and take off the starter motor solenoid housing. The first step requires unfastening the starter solenoid nut before you set aside the harness while you progress to remove the starter motor solenoid nut although you must re-tighten it to 12 Nm (9 lb-ft) during reinstallation. When installing the cable bracket bolt for the battery you must tighten it to 20 Nm (15 lb-ft). The generator B+ nut requires removal while tightening it to 8 Nm (71 lb-in) for replacement. The two generator electrical connectors should be disconnected before removing the battery cable ground nut which needs to be positioned aside with a tight torque of 10 Nm (89 lb-in). Open the BJB cover then remove the BJB nut while tightening it to 12 Nm (9 lb-ft) before disconnection of BJB battery cables. Replace the removed battery cable ground bolt while positioning the harness aside before securing it to a torque of 10 Nm (89 lb-in). End the procedure by detaching the electrical connector from near the battery tray followed by releasing the battery cable locators from the battery tray. The completion of service requires performing the opposite steps used for removal.