FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln Aviator Brake Booster
Brake Power Booster- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Boosters found
2005 Lincoln Aviator Brake Booster Part Number: 5L2Z-2005-A
Product Specifications- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: 3L2Z-2005-AB
- Base No.: 2005
- Item Weight: 12.20 Pounds
- Item Dimensions: 11.4 x 11.2 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-2005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Brake Booster Part Number: 4C5Z-2005-AA
Product Specifications- Other Name: Booster Assembly - Brake; Booster Assembly
- Base No.: 3C5Z-2005-AA
- Item Weight: 10.30 Pounds
- Item Dimensions: 19.4 x 12.6 x 12.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C5Z-2005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln Aviator Brake Booster
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln Aviator Brake Booster Parts Q&A
- Q: How to service the vacuum brake booster on 2005 Lincoln Aviator?A: Service of the vacuum brake booster needs master cylinder removal followed by disconnecting both brake booster solenoid electrical connector and brake booster transducer electrical connector. The service on the brake booster requires removal of two components. First detach the electrical harness connector bracket from the brake booster housing followed by vacuum hose disconnection from the brake booster. Before moving the brake stoplamp switch to the side the technician must remove both the redundant self-locking pin cover and self-locking pin. First remove the brake stoplamp switch bushing as well as the spacer and the brake booster push rod. New nuts should be used for the brake booster installation while tightening the nuts to 22 Nm (16 ft. lbs.). Re-installation of the replacement should start by reversing all steps used for removal.