How to service the hood latch on 2005 Lincoln LS?

Begin by marking the hood latch position and remove its two bolts then fasten them to 12 Nm (9 lb-ft) torque. The hood latch upward position and the disconnection of the hood latch release cable procedure must be completed before removing the latch. Check the correct installation of the latch by inspecting its positioning if you replace it with a new one. Then apply lubrication to all hood latch points as the final step of installation. The installation process consists of performing the reverse steps for removal.

OEM 2005 Lincoln LS Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2005 Lincoln LS Latch Part Number: 5W4Z-16700-A
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch
- Replaces: 4W4Z-16701-AA
- Base No.: 16700
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W4Z-16700-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2005 Lincoln LS Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln LS Hood Latch Parts Q&A

Q: How to service the hood latch on 2005 Lincoln LS?
A: Begin by marking the hood latch position and remove its two bolts then fasten them to 12 Nm (9 lb-ft) torque. The hood latch upward position and the disconnection of the hood latch release cable procedure must be completed before removing the latch. Check the correct installation of the latch by inspecting its positioning if you replace it with a new one. Then apply lubrication to all hood latch points as the final step of installation. The installation process consists of performing the reverse steps for removal.