How to Service the Yaw Sensor on 2005 Lincoln LS?

Service of the yaw rate sensor begins by first removing the floor console when present. The carpeting needs to be folded back to reach the yaw rate sensor so its electrical connector can be detached. Lift the two nuts which secure the yaw rate sensor before removing the sensor. During new yaw rate sensor installation you need to implement vehicle as built data to configure the anti-lock brake system (ABS) module before completing calibration based on the diagnostic tool guidelines. Tighten the sensor to 9 Nm (80 inch lbs.) following the identical installation order as removal.

OEM 2005 Lincoln LS Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2005 Lincoln LS Yaw Rate Sensor
Part Number: 6W4Z-3C296-AA
Product Specifications
- Other Name: Sensor Assembly
- Replaces: 3W4Z-3C296-BA
- Base No.: 3C187
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W4Z-3C296-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2005 Lincoln LS Yaw Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Yaw Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Yaw Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln LS Yaw Sensor Parts Questions & Experts Answers

Q: How to Service the Yaw Sensor on 2005 Lincoln LS?
A: Service of the yaw rate sensor begins by first removing the floor console when present. The carpeting needs to be folded back to reach the yaw rate sensor so its electrical connector can be detached. Lift the two nuts which secure the yaw rate sensor before removing the sensor. During new yaw rate sensor installation you need to implement vehicle as built data to configure the anti-lock brake system (ABS) module before completing calibration based on the diagnostic tool guidelines. Tighten the sensor to 9 Nm (80 inch lbs.) following the identical installation order as removal.