How to service the spark plugs on 2005 Lincoln Navigator?

The servicing process for ignition coil-on-plug starts with its removal. A compressed air stream should be used to remove foreign matter from the spark plug well before starting the plug removal process. You should reinstall original spark plugs into their original cylinder of removal when reusing them while new spark plugs can go into any cylinder. Examine the spark plugs after removal then put new ones in unless they pass inspection tests. Workers should install spark plugs with a torque of 34 Nm (25 lb-ft) using the opposite method by which they removed them.

OEM 2005 Lincoln Navigator Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spark Plug found

View related parts
2005 Lincoln Navigator Spark Plug Part Number: AGSF-32P-MX
$6.04 MSRP: $9.35
You Save: $3.31 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: AGSF-32P-M, AGSF-32P-MF4, SP-493
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AGSF-32P-MX
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2005 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2005 Lincoln Navigator Spark Plug

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Navigator Spark Plug available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Navigator Spark Plug as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Navigator Spark Plug Parts Q&A

Q: How to service the spark plugs on 2005 Lincoln Navigator?
A: The servicing process for ignition coil-on-plug starts with its removal. A compressed air stream should be used to remove foreign matter from the spark plug well before starting the plug removal process. You should reinstall original spark plugs into their original cylinder of removal when reusing them while new spark plugs can go into any cylinder. Examine the spark plugs after removal then put new ones in unless they pass inspection tests. Workers should install spark plugs with a torque of 34 Nm (25 lb-ft) using the opposite method by which they removed them.