FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Monterey Engine Control Module
Engine Control Computer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Engine Control Modules found
2005 Mercury Monterey PCM Part Number: DF2Z-12A650-CARM
Product Specifications- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 5F2Z-12A650-CC, 5F2Z-12A650-BC, 5F2Z-12A650-EC, 5F2Z-12A650-DC, 5F2Z-12A650-DCRM, 5F2Z-12A650-HB, 5F2Z-12A650-KB
- Base No.: 12A650
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.1 x 7.3 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DF2Z-12A650-CARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Monterey PCM Part Number: DF2Z-12A650-BARM
Product Specifications- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 4F2Z-12A650-HG, 4F2Z-12A650-GG, 4F2Z-12A650-CG, 4F2Z-12A650-HGRM, 4F2Z-12A650-DG, 4F2Z-12A650-GC
- Base No.: 12A650
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.0 x 7.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DF2Z-12A650-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Monterey Engine Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Monterey Engine Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Monterey Engine Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Monterey Engine Control Module Parts Q&A
- Q: How to service the Engine Control Module on 2005 Mercury Monterey?A: Service of the Engine Control Module should start with disconnection of the battery ground cable. First loosen the bolt which leads to disconnecting the PCM electrical connector before tightening the bolt to 7 Nm (62 lb-in) when reinstalling it. The two PCM-to-dash nuts need to be removed before service but should be installed with a torque of 5 Nm (44 lb-in). The PCM replacement must follow reverse installation order after its removal.