What are the crucial steps to follow when servicing the rear shock absorber on 2006 Ford Crown Victoria?

Service of the rear shock absorber requires caution since all vehicles use gas-pressured shock absorbers which extend automatically without assistance therefore use no heat or flame near the shock absorber tube to prevent injury to yourself. Installation of new suspension fasteners requires using components made to match existing part numbers or their equivalent with correct torque specifications to guarantee proper system retention. One can install shock absorbers separately, as they do not require pairing with additional units. Prior to starting any work the operator must disable electrical power to air suspension lines to stop unexpected air spring function that would shift the vehicle during hoisting, jacking and towing operations. A fire suppression system must be put into depowered status for vehicles that have this system installed. The vehicle must sit in NEUTRAL gear while being positioned on a hoist with sufficient support applied to the rear axle by means of suitable jacks or stands. After extraction of the upper shock nut combined with washer and insulator discard them while torquing the new upper nut to 40 Nm (30 ft. lbs.). Follow up by eliminating the lower shock absorber nut along with its bolt and shock absorber, then dispose of both components before torquing the new lower shock nut to 90 Nm (66 ft. lbs.). The car needs its fire suppression system to be activated after the installation process is done.

OEM 2006 Ford Crown Victoria Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2006 Ford Crown Victoria Shock Absorber
Part Number: BW7Z-18124-A
$102.65 MSRP: $168.91
You Save: $66.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 7W7Z-18124-H, ASH-1035, 6W7Z-18124-B, 6W7Z-18124-D, ASH-24529, 7W7Z-18124-A, BW7Z-18124-B, 6W7Z-18124-A, 7W7Z-18124-C, 7W7Z-18124-D, ASH-1037, ASH-1036, ASH-12274
- Base No.: 18124
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.9 x 5.0 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Crown Victoria Shock Absorber, Gray/Red, Rear
Part Number: 8W7Z-18125-D
$77.11 MSRP: $129.45
You Save: $52.34 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 4W3Z-18125-AA, 6W7Z-18125-D, 6W1Z-18125-A, 7W7Z-18125-D, 8W3Z-18125-A, 8W7Z-18125-B, ASH-1152, ASH-24537, ASH-711, 7W1Z-18125-A, ASH-12275, 3W7Z-18125-GA, 4W7Z-18125-DA, 3U2Z-18125-AC, 7W3Z-18125-H, 8W7Z-18125-C, ASH-24538, ASH-1038, ASH-24536, ASH-267, ASH-1041
- Base No.: 18125
- Item Weight: 5.10 Pounds
- Item Dimensions: 27.0 x 3.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-18125-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Crown Victoria Shock Absorber, Blue/Green, Rear
Part Number: BW7Z-18125-B
$85.31 MSRP: $140.36
You Save: $55.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock; Strut & Shock Kit; Air to Coil Conversion; Complete Strut; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 3U2Z-18125-AF, 3W7Z-18125-FA, 4W7Z-18125-CA, 6W7Z-18125-C, 6W7Z-18125-B, 7W7Z-18125-B, 7W7Z-18125-C, 8W1Z-18125-D, 8W1Z-18125-B, 8W1Z-18125-C, ASH-1040, ASH-1039, ASH-24535, ASH-1151, ASH-24490, 7W1Z-18125-G, ASH-710, 3U2Z-18125-AB, ASH-12276, BW7Z-18125-A, 8W1Z-18125-A, ASH-24534, ASH-24491
- Base No.: 18125
- Item Weight: 10.60 Pounds
- Item Dimensions: 29.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Crown Victoria Shock Absorber, Front
Part Number: 3U2Z-18124-BJ
Product Specifications
- Other Name: Shock Absorber Assembly; Strut; Shock Absorber Assembly - Front
- Manufacturer Note: RH & LH, "White" (replacing 3W7Z,18124,AA) , base, standard duty suspension, BEFORE 12/01/03
- Position: Front
- Base No.: 18124
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.7 x 4.6 x 21.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3U2Z-18124-BJ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Crown Victoria Shock Absorber, Rear
Part Number: 3U2Z-18125-AD
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Manufacturer Note: RH or LH, "White" (replacing 3W7Z-18125-DA), standard suspension, BEFORE 12/01/03
- Position: Rear
- Base No.: 18125
- Item Weight: 5.70 Pounds
- Item Dimensions: 3.2 x 3.1 x 24.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3U2Z-18125-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Crown Victoria Shock Absorber, Front
Part Number: 3U2Z-18124-BP
Product Specifications
- Other Name: Shock Absorber Assembly; Strut; Shock Absorber Assembly - Front
- Manufacturer Note: RH & LH, "Blue" (replacing 3W7Z-18124-CA), Police equipment & Taxi package, BEFORE 12/01/03
- Position: Front
- Base No.: 18124
- Item Weight: 8.00 Pounds
- Item Dimensions: 4.3 x 4.2 x 21.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3U2Z-18124-BP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Crown Victoria Shock Absorber, Front
Part Number: 3U2Z-18124-BK
Product Specifications
- Other Name: Shock Absorber Assembly; Strut; Shock Absorber Assembly - Front
- Manufacturer Note: RH & LH (replacing 3W7Z-18124-BA), with sport equipment package, BEFORE 12/01/03
- Position: Front
- Base No.: 18124
- Item Weight: 7.70 Pounds
- Item Dimensions: 4.6 x 4.8 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3U2Z-18124-BK
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Crown Victoria Submodels:
- Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2006 Ford Crown Victoria Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Crown Victoria Shock Absorber Parts Questions & Experts Answers

Q: What are the crucial steps to follow when servicing the rear shock absorber on 2006 Ford Crown Victoria?
A: Service of the rear shock absorber requires caution since all vehicles use gas-pressured shock absorbers which extend automatically without assistance therefore use no heat or flame near the shock absorber tube to prevent injury to yourself. Installation of new suspension fasteners requires using components made to match existing part numbers or their equivalent with correct torque specifications to guarantee proper system retention. One can install shock absorbers separately, as they do not require pairing with additional units. Prior to starting any work the operator must disable electrical power to air suspension lines to stop unexpected air spring function that would shift the vehicle during hoisting, jacking and towing operations. A fire suppression system must be put into depowered status for vehicles that have this system installed. The vehicle must sit in NEUTRAL gear while being positioned on a hoist with sufficient support applied to the rear axle by means of suitable jacks or stands. After extraction of the upper shock nut combined with washer and insulator discard them while torquing the new upper nut to 40 Nm (30 ft. lbs.). Follow up by eliminating the lower shock absorber nut along with its bolt and shock absorber, then dispose of both components before torquing the new lower shock nut to 90 Nm (66 ft. lbs.). The car needs its fire suppression system to be activated after the installation process is done.