FordParts
My Garage
My Account
Cart
OEM 2006 Ford F-150 Ignition Switch
Starter Ignition Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ignition Switch found
2006 Ford F-150 Ignition Switch Part Number: DG9Z-11572-A
$65.75 MSRP: $108.18You Save: $42.43 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Switch Assembly - Ignition; Ignition Starter Switch; Ignition Lock Cylinder
- Replaces: 98AZ-11572-A, YS4Z-11572-AC, SW-6343
- Base No.: 11572
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG9Z-11572-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-150 Ignition Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-150 Ignition Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-150 Ignition Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-150 Ignition Switch Parts Q&A
- Q: How to service and repair the ignition switch on 2006 Ford F-150?A: Service and repair operations on the ignition switch need to start by depowering the supplemental restraint system (SRS). The service and repair of the ignition switch starts by removing the steering wheel followed by taking out the lower steering column shroud screw. Pressing inward on the joining areas between upper and lower steering column shroud covers permitting their detachment so you can remove the lower cover. After securing the two screws which hold the upper steering column shroud you must pull out the screw connected to the tab while moving the multi-function switch to a different position. To detach the ignition switch you must disconnect its electric connector followed by releasing the two lock tabs to extract the component. The replacement of the new ignition switch requires following the reverse installation steps while completing SRS supplemental restraint system reactivation.