What precautions should be taken when servicing the passenger air bag module on 2006 Ford Freestar?

Safety glasses must be worn by technicians who handle passenger air bag modules since the requirement protects users from injuries that could happen during deployment. Solid air bag handling requires holding the module with the air bag and trim cover pointed into the opposite direction of your body and preventing face-down placements. A complete handwashing is essential to remove all sodium hydroxide residue after deployment. The connectors on air bag modules should not be probed to avoid unwanted deployment of components and owners should replace modules with damaged or discolored deployment doors instead of trying to repaint them. Memory saver devices should never be used while SRS functionality needs to be operational before returning vehicles to customers. The system needs to be depowered first while using fingers to push in two glove compartment door tabs for lowering the compartment. You need to disconnect the passenger air bag module electrical connector using the glove compartment opening while you remove its pin-type retainers from the module. Proceed by disconnecting the four bolts that maintain the passenger air bag module as well as both brackets from the assembly. You should rotate the top section of the module upside down until the tabs free themselves before managing the wire harness during replacement installation of the same module. For installation of a new module, first remove any temporary tape from the wire harness and connector. Insert the module into the glove compartment opening so that its tabs fit the bracket slots on top of the instrument panel cross-car beam. The module requires four bolts fastened with 9 Nm torque (80 lb-in) then the two brackets receive their bolts at the same torque setting of 9 Nm (80 lb-in). Complete the process by installing wire harness pin-type retainers along with the connector before reconnecting the electrical link, closing the glove compartment and restarting the power supply.

OEM 2006 Ford Freestar Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Air Bags found

View related parts
2006 Ford Freestar Head Air Bag, Driver Side
Part Number: 7F2Z-17042D95-A
$141.53 MSRP: $195.79
You Save: $54.26 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Curtain Assembly; Curtain Air Bag, Left
- Position: Driver Side
- Replaces: 5F2Z-17042D95-AA
- Base No.: <042D94
- Item Weight: 16.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-17042D95-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Head Air Bag, Passenger Side
Part Number: 7F2Z-17042D94-A
$133.50 MSRP: $184.69
You Save: $51.19 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Curtain Assembly; Curtain Air Bag, Right
- Position: Passenger Side
- Replaces: 5F2Z-17042D94-AA
- Base No.: <042D94
- Item Weight: 15.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-17042D94-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Driver Air Bag
Part Number: 5F2Z-17043B13-BB
$95.30 MSRP: $131.84
You Save: $36.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; Steering Wheel Air Bag
- Manufacturer Note: (-7*)
- Base No.: <043B13
- Item Weight: 4.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-17043B13-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Driver Inflator Module
Part Number: 4F2Z-17043B13-AAA
$82.22 MSRP: $113.74
You Save: $31.52 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Manufacturer Note: (-6*)
- Base No.: <043B13
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-17043B13-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Side Impact Inflator Module, Front Driver Side
Part Number: 4F2Z-17611D11-AA
$161.11 MSRP: $222.88
You Save: $61.77 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Seat Air Bag, Front Left; Side Air Bag
- Position: Front Driver Side
- Base No.: <611D10
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-17611D11-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Side Impact Inflator Module, Front Passenger Side
Part Number: 4F2Z-17611D10-AA
$178.29 MSRP: $242.62
You Save: $64.33 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Seat Air Bag, Front Right; Side Air Bag
- Position: Front Passenger Side
- Base No.: <611D10
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-17611D10-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Driver Air Bag
Part Number: 6F2Z-17043B13-BA
$80.80 MSRP: $111.77
You Save: $30.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; Steering Wheel Air Bag
- Manufacturer Note: (-7*)
- Base No.: <043B13
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-17043B13-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Driver Air Bag
Part Number: 5F2Z-17043B13-BA
$288.22 MSRP: $395.45
You Save: $107.23 (28%)
ADD TO CART
Product Specifications
- Other Name: Module; Steering Wheel Air Bag
- Manufacturer Note: (-6*)
- Base No.: <043B13
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-17043B13-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Inflator Curtain, Driver Side
Part Number: 3F2Z-17042D95-AA
Product Specifications
- Other Name: Module - Air Bag; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Base No.: <042D94
- Item Weight: 17.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-17042D95-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Inflator Curtain, Passenger Side
Part Number: 3F2Z-17042D94-AA
Product Specifications
- Other Name: Curtain Assembly; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Base No.: <042D94
- Item Weight: 17.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-17042D94-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Driver Inflator Module
Part Number: 4F2Z-17043B13-BAA
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Manufacturer Note: (-6*)
- Base No.: <043B13
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-17043B13-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Driver Air Bag
Part Number: 5F2Z-17043B13-AA
Product Specifications
- Other Name: Module; Steering Wheel Air Bag
- Manufacturer Note: (-6*)
- Base No.: <043B13
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-17043B13-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
2006 Ford Freestar Passenger Air Bag, Upper
Part Number: 6F2Z-17044A74-AA
Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper
- Replaces: 5F2Z-17044A74-AA
- Base No.: <044A74
- Item Weight: 8.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-17044A74-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2006 Ford Freestar Air Bag

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestar Air Bag available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestar Air Bag as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Freestar Air Bag Parts Questions & Experts Answers

Q: What precautions should be taken when servicing the passenger air bag module on 2006 Ford Freestar?
A: Safety glasses must be worn by technicians who handle passenger air bag modules since the requirement protects users from injuries that could happen during deployment. Solid air bag handling requires holding the module with the air bag and trim cover pointed into the opposite direction of your body and preventing face-down placements. A complete handwashing is essential to remove all sodium hydroxide residue after deployment. The connectors on air bag modules should not be probed to avoid unwanted deployment of components and owners should replace modules with damaged or discolored deployment doors instead of trying to repaint them. Memory saver devices should never be used while SRS functionality needs to be operational before returning vehicles to customers. The system needs to be depowered first while using fingers to push in two glove compartment door tabs for lowering the compartment. You need to disconnect the passenger air bag module electrical connector using the glove compartment opening while you remove its pin-type retainers from the module. Proceed by disconnecting the four bolts that maintain the passenger air bag module as well as both brackets from the assembly. You should rotate the top section of the module upside down until the tabs free themselves before managing the wire harness during replacement installation of the same module. For installation of a new module, first remove any temporary tape from the wire harness and connector. Insert the module into the glove compartment opening so that its tabs fit the bracket slots on top of the instrument panel cross-car beam. The module requires four bolts fastened with 9 Nm torque (80 lb-in) then the two brackets receive their bolts at the same torque setting of 9 Nm (80 lb-in). Complete the process by installing wire harness pin-type retainers along with the connector before reconnecting the electrical link, closing the glove compartment and restarting the power supply.