How to service and repair the ignition switch on 2006 Ford Mustang?

The first step to servicing the ignition switch requires partial depowering of the supplemental restraint system (SRS). The sides should be gently pressed to remove the upper steering column shroud followed by removal of three screws for the lower shroud. Disconnect and remove the ignition switch electrical connector after releasing its two locking tabs. Reinstallation of the new ignition switch follows the reverse order of removal work while a SRS repowering procedure is necessary. The column requires proper protection by farmers who must not simultaneously extract the ignition lock cylinder and the ignition switch.

OEM 2006 Ford Mustang Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Switch found

View related parts
2006 Ford Mustang Ignition Switch Part Number: DG9Z-11572-A
$61.43 MSRP: $101.07
You Save: $39.64 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch; Ignition Lock Cylinder
- Replaces: 98AZ-11572-A, YS4Z-11572-AC, SW-6343
- Base No.: 11572
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DG9Z-11572-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Mustang Submodels:
- Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2006 Ford Mustang Ignition Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Mustang Ignition Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Mustang Ignition Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Mustang Ignition Switch Parts Q&A

Q: How to service and repair the ignition switch on 2006 Ford Mustang?
A: The first step to servicing the ignition switch requires partial depowering of the supplemental restraint system (SRS). The sides should be gently pressed to remove the upper steering column shroud followed by removal of three screws for the lower shroud. Disconnect and remove the ignition switch electrical connector after releasing its two locking tabs. Reinstallation of the new ignition switch follows the reverse order of removal work while a SRS repowering procedure is necessary. The column requires proper protection by farmers who must not simultaneously extract the ignition lock cylinder and the ignition switch.