How to Service and Repair the Motor and Transmission Mount on 2006 Ford Taurus?

The transaxle support insulator servicing procedure must start with placing the vehicle in neutral gear and hoisting it before moving forward. Begin by using a high-lift transmission jack to sustain the transaxle before removing the LH wheel together with its tire. The procedure begins by removing the LH transaxle upper support insulator nut followed by removal of engine and transaxle upper support bracket bolts and bracket. The next step involves removing both bolts on the engine and transaxle upper support and the insulator from its position. You should start with installing the LH transaxle support insulator and secure its bolts to 90 Nm (66 ft. lbs.). Proceed by installing the transaxle upper support bracket with bolts while tightening them to 62 Nm (46 ft. lbs.) before finishing with the transaxle upper support insulator nut at 90 Nm (66 ft. lbs.). After securing all components remove the transmission jack along with reinstalling the left-hand wheel and tire and performing the vehicle lowering process.

OEM 2006 Ford Taurus Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Motor And Transmission Mounts found

View related parts
2006 Ford Taurus Rear Mount Part Number: 4F1Z-6068-BA
$61.09 MSRP: $84.52
You Save: $23.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Manufacturer Note: 12V
- Position: Rear
- Replaces: YF1Z-6068-AA
- Base No.: 6068
- Item Weight: 2.80 Pounds
- Item Dimensions: 6.1 x 3.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Front Mount Part Number: YF1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator; Engine Mount
- Position: Front
- Base No.: 6038
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Transmission Mount, Rear Part Number: 3F1Z-6F063-AA
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Transfer Case Mount; Motor Mount; Rear Insulator
- Position: Rear
- Replaces: YF1Z-6F063-AA
- Base No.: 6F063
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-6F063-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Motor And Transmission Mount Parts Q&A

Q: How to Service and Repair the Motor and Transmission Mount on 2006 Ford Taurus?
A: The transaxle support insulator servicing procedure must start with placing the vehicle in neutral gear and hoisting it before moving forward. Begin by using a high-lift transmission jack to sustain the transaxle before removing the LH wheel together with its tire. The procedure begins by removing the LH transaxle upper support insulator nut followed by removal of engine and transaxle upper support bracket bolts and bracket. The next step involves removing both bolts on the engine and transaxle upper support and the insulator from its position. You should start with installing the LH transaxle support insulator and secure its bolts to 90 Nm (66 ft. lbs.). Proceed by installing the transaxle upper support bracket with bolts while tightening them to 62 Nm (46 ft. lbs.) before finishing with the transaxle upper support insulator nut at 90 Nm (66 ft. lbs.). After securing all components remove the transmission jack along with reinstalling the left-hand wheel and tire and performing the vehicle lowering process.