OEM 2006 Lincoln Mark LT Brake Booster

2006 Lincoln Mark LT Brake Booster Parts Questions & Experts Answers

• Q: How to service and repair the vacuum brake booster on 2006 Lincoln Mark LT?

  A: The vacuum brake booster repair and servicing will start with disconnecting both the brake fluid level warning switch electrical connector and the battery ground cable. The brake booster vacuum hose should be disconnected first then the two nuts must be removed to place the brake master cylinder to the side while tightening the nuts to 25 Nm (18 ft.lbs) when reinstalling. Service providers should secure the brake pedal to the booster rod before taking out the speed control deactivator switch mounted on the brake pedal bracket. Move forward by eliminating the self-locking pin cover and the self-locking pin before placing the stoplamp switch and booster rod with bushing part on the brake pedal pin. The four brake booster nuts need removal according to the installation procedure requiring 25 Nm (18 ft. lbs.) torque when reinstalling. The installation process can be finished by following the reverse procedure. Applying approved DOT 3 motor vehicle brake fluid is crucial because improper fluid choice leads to permanent component destruction and users should protect painted and plastic surfaces from fluid exposure to avoid damage. Continuous eye water flush for 15 minutes followed by medical assistance is necessary when eyes come in contact with the fluid. Ingesting this fluid requires you to drink water followed by vomiting while obtaining quick professional medical help.