FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr A/C Hose
Air Conditioning Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 A/C Hoses found
2006 Lincoln Zephyr Discharge Hose Part Number: 6E5Z-19D734-BA
Product Specifications- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Base No.: 19D734
- Item Weight: 3.20 Pounds
- Item Dimensions: 25.4 x 12.6 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19D734-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Suction Hose Part Number: 6E5Z-19835-BA
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Evaporator Tube
- Base No.: 19835B
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.0 x 11.6 x 24.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Suction Hose Part Number: 6E5Z-19835-AA
Product Specifications- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Pressure Line
- Base No.: 19835A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.5 x 8.2 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr A/C Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr A/C Hose Parts Q&A
- Q: How to Service and Repair the A/C Hose Compressor Manifold and Tube Assembly on 2006 Lincoln Zephyr?A: Starting the service and repair process for the compressor manifold and tube assembly requires refrigerant recovery. A service position involves neutrality on a hoist while removing the lower engine splash shield if present. To detach the compressor manifold from the A/C compressor you must remove the manifold bolt followed by gasket seal discarding and tighten new installation to 15 Nm (11 lb-ft). Remove the two coolant reservoir hose retainers from the assembly before taking off the washer reservoir filler neck bolt which must be tightened to 6 Nm (53 lb-in) when reinstalling it. Tighten the new installation to 15 Nm (11 lb-ft) torque after completing the disconnect of the compressor manifold and tube suction fitting by discarding the gasket seal. Use the same method to stop and detach the condenser inlet fitting nut before disconnecting the fitting while getting rid of the gasket seal then securing the new installation with 15 Nm (11 lb-ft) torque. Reverse the removal procedure while installing all components so reinstall new gasket seals and fill the refrigeration system with correct quantities of clean PAG oil. The last steps include system evacuation together with leak testing then charging the refrigerant system.