FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr Fan Motor
Cooling Fan Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fan Motor found
2006 Lincoln Zephyr Fan & Motor Part Number: 7E5Z-8C607-A
Product Specifications- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan; Cooling Fan Assembly; Fan Blade; Fan Assembly
- Replaces: 6E5Z-8C607-AA
- Base No.: 8C607
- Item Weight: 10.90 Pounds
- Item Dimensions: 6.1 x 23.2 x 33.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-8C607-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Fan Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr Fan Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr Fan Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr Fan Motor Parts Q&A
- Q: How to service and repair the radiator cooling fan motor and shroud on all on 2006 Lincoln Zephyr?A: Starting radiator cooling fan motor and shroud repair tasks on all vehicles requires positioning them on a hoist with neutral selected. Disconnect the battery ground cable. The generator air inlet duct must be removed away from 2.3L engines. The 3 block heater wire retainers must be detached from the cooling fan motor and shroud on all vehicles and then placed aside. After splashing shield removal you should detach the lower radiator hose bracket from the cooling fan motor and shroud. You must detach the retainer which holds the lower radiator hose from both the motor and the cooling fan shroud on 3.0L engine models. The cooling fan motor installation requires automatic transmission vehicles to separate their transmission cooler tubes from the shroud. Start by removing the cooling fan motor electrical connector followed by unharnessing the four retainers from the wiring and placing the harness aside then releasing the tabs before removing both the cooling fan motor and shroud unit. Reverse the steps used for removal to install the component.