FordParts
My Garage
My Account
Cart
OEM 2007 Ford Crown Victoria Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2007 Ford Crown Victoria Battery Cable Part Number: 5W1Z-14300-BB
$164.65 MSRP: $270.91You Save: $106.26 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cable Harness; Battery Cables; Cable Assembly; Positive Cable
- Replaces: 5W1Z-14300-BA
- Base No.: 14300
- Item Weight: 6.50 Pounds
- Item Dimensions: 16.2 x 16.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W1Z-14300-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Crown Victoria Cable Assembly Part Number: 5W7Z-14300-DB
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cable Harness; Battery Cables; Positive Cable
- Manufacturer Note: Complete assembly, Police, FROM 04/18/05
- Base No.: 14300
- Item Weight: 5.50 Pounds
- Item Dimensions: 31.6 x 18.7 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W7Z-14300-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Crown Victoria Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Crown Victoria Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Crown Victoria Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Crown Victoria Battery Cable Parts Q&A
- Q: How to service and repair the battery cables on 2007 Ford Crown Victoria?A: Start the vehicle service or repair of battery cables by putting the vehicle into neutral position on a hoist. The battery disconnection procedure requires removal of the engine cover nut then safe placement of the cover until it reaches 10 Nm (89 lb-in) torque during reinstallation. First remove the bolt to move the body ground terminal for installation. When positioning the bolt secure it at 12 Nm (9 lb-ft). Take out the two fenderwell harness locators before removing the connecting nut which enables placement of the battery junction box (BJB) terminal aside, tightening it to 12 Nm (9 lb-ft) for installation. The generator B+ terminal needs a nut removal for placement aside before tightening it to 12 Nm (9 lb-ft) during installation. If possible tighten the engine ground terminal of the battery cable to 12 Nm (9 lb-ft) during installation after you remove the harness locator from the generator bracket and the nut. Unplug the battery cable harness locator from the valve cover stud bolt before you can take off the starter terminal cover. Installation of the starter solenoid requires first tightening the positive terminal nut to 12 Nm (9 lb-ft) then removing this nut to place the solenoid wire terminal aside before tightening it to 8 Nm (71 lb-in) after reinstallation. Conclude by taking away the battery cable harness before following all removal procedure steps in reverse order during installation.