My Garage
Cart

OEM 2007 Ford Crown Victoria Fuel Level Sensor

Gas Gauge Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

  • 2007 Ford Crown Victoria Fuel Level Sensor - 6W1Z-9A299-A
    2007 Ford Crown Victoria Fuel Level Sensor Diagram - 6W1Z-9A299-A
    View related parts

    2007 Ford Crown Victoria Fuel Gauge Sending Unit
    Part Number: 6W1Z-9A299-A

    $71.16 MSRP: $117.09
    You Save: $45.93 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
    • Base No.: 9A299
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 4.4 x 4.6 x 14.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6W1Z-9A299-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Crown Victoria Submodels:
    • Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2007 Ford Crown Victoria Fuel Level Sensor - 2W1Z-9275-AB
    2007 Ford Crown Victoria Fuel Level Sensor Diagram - 2W1Z-9275-AB
    View related parts

    2007 Ford Crown Victoria Fuel Gauge Sending Unit
    Part Number: 2W1Z-9275-AB

    $64.74 MSRP: $102.80
    You Save: $38.06 (38%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
    • Replaces: 2W1Z-9275-AA
    • Base No.: 9A299
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 12.5 x 3.0 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 2W1Z-9275-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Crown Victoria Submodels:
    • Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Ford Crown Victoria Fuel Level Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Crown Victoria Fuel Level Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Crown Victoria Fuel Level Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Crown Victoria Fuel Level Sensor Parts Questions & Experts Answers

  • Q: How to service and repair the fuel level sensor in the fuel pump module on 2007 Ford Crown Victoria?
    A: Service or repair operations on the fuel level sensor in the fuel pump module start with disabling the fire suppression system only if available. Start by taking off the fuel tank before unscrewing the pressure transducer electrical connector which exists at the fuel tank's top rear corner and releasing the two harness retainers. Clean the area surrounding the fuel pump mounting flange while treating the fuel pump gently to prevent float arm and filter damage. Insert the fuel pump by torquing its six bolts to reach 10 Nm (89 lb-in). Remove the old fuel pump mounting gasket from the assembly which involves checking the surfaces of the fuel pump module flange for contact with the fuel tank seal contact areas. Avoid any surface adjustment or polishing steps on these areas. A new fuel tank or fuel pump module needs installation when any part of the fuel tank seal contact areas shows bending damage or scratches or corrosion. Use a new fuel pump module seal to finish the installation of the component per the reverse steps used for removal. Repower the fire suppression system after its power has been depowered.

Related 2007 Ford Crown Victoria Parts