How to service and repair the fuel level sensor safely on Ford Crown Victoria?

Begin the service and repair of the fuel level sensor by guaranteeing safety through prevention of indoor smoking or using lighted tobacco or keeping any open flames away from fuel-related components because highly flammable mixtures can ignite causing serious personal injury. Cell phones along with audio devices should be left behind when working in this space. Totally adhere to all fuel handling procedures while also staying ready to manage possible fuel leakages due to hot vehicle elements. Always disconnect the battery ground cable before starting to work on the evaporative emission (EVAP) system or any fuel-related components. Before servicing any vehicle with fire suppression system operators must depower the system first. The service begins with removal of the fuel pump module followed by a removal of heat shrink tubing from the fuel level sensor connector before disconnecting it. To separate the fuel level sensor from the FP module it requires removing both screws and unmoving the ground wire eyelet. The procedure for installing the new sensor follows all actions done for removal in reverse order. The fire suppression system must be reactivated by following the protocol after the assembly process has been completed.

OEM Ford Crown Victoria Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Level Sensors found

View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: 6W1Z-9A299-A
$71.16 MSRP: $117.09
You Save: $45.93 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: 2W1Z-9275-AB
$64.74 MSRP: $102.80
You Save: $38.06 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
- Replaces: 2W1Z-9275-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2008 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: XW1Z-9275-AA
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit; Sending Unit
- Manufacturer Note: FROM 11/30/98
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: F3VY-9275-B
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Replaces: F3AZ-9275-D, F3AZ-9275-G, FOVY-9275-A, F3VY-9275-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: F5AZ-9275-A
Product Specifications
- Other Name: Sender Assembly; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Manufacturer Note: exc. Mexico
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: F3AZ-9275-B
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Manufacturer Note: MECHANICAL INSTR. CLUSTER
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Fuel Gauge Sending Unit Part Number: F2AZ-9275-B
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit; Sending Unit
- Manufacturer Note: MECHANICAL INSTR. CLUSTER
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Ford Crown Victoria | Base, LX, S, Touring Sedan | 8 Cyl 4.6 L GAS

Ford Crown Victoria Fuel Level Sensor

OEM Fuel Level Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Level Sensor with long life and a perfect fit. Come to our website and find genuine Ford Crown Victoria parts. We keep a wide inventory of OEM Crown Victoria parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Fuel Level Sensor in Ford Crown Victoria vehicle is an important unit to indicate the fuel level in the tank to the driver. These electronic devices are specifically created to give precise data on the extent of fuel with respect to temperatures and the data is delivered almost instantly. Made up of a float, actuating rod, and resistor, the fuel sensor transmits information regarding the fuel level to the fuel gauze so that the driver is notified of the need to refill. In the case of any fault, regarding the fuel level sensor, it is advisable to consult professional Auto mechanics to avoid holding a full fuel tank indication after refueling.

Ford Crown Victoria Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
6W1Z-9A299-A
Q: How to service and repair the fuel level sensor safely on Ford Crown Victoria?
A:
Begin the service and repair of the fuel level sensor by guaranteeing safety through prevention of indoor smoking or using lighted tobacco or keeping any open flames away from fuel-related components because highly flammable mixtures can ignite causing serious personal injury. Cell phones along with audio devices should be left behind when working in this space. Totally adhere to all fuel handling procedures while also staying ready to manage possible fuel leakages due to hot vehicle elements. Always disconnect the battery ground cable before starting to work on the evaporative emission (EVAP) system or any fuel-related components. Before servicing any vehicle with fire suppression system operators must depower the system first. The service begins with removal of the Fuel Pump module followed by a removal of heat shrink tubing from the fuel level sensor connector before disconnecting it. To separate the fuel level sensor from the FP module it requires removing both screws and unmoving the ground wire eyelet. The procedure for installing the new sensor follows all actions done for removal in reverse order. The fire suppression system must be reactivated by following the protocol after the assembly process has been completed.