OEM 2007 Ford Crown Victoria Ride Height Sensor

2007 Ford Crown Victoria Ride Height Sensor Parts Questions & Experts Answers

• Q: What Precautions Should Be Taken Before Servicing the Ride Height Sensor on 2007 Ford Crown Victoria?

  A: Before working on the suspension height sensor check that air suspension electrical power is off by disabling the air suspension switch found in the LH rear quarter trim panel to stop unexpected air spring inflation or deflation that could result in vehicle shifting while working which poses personal injury risks. A replacement requires parts that match the original part number or its equivalent when using new components because these suspension fasteners directly affect vital component performance; use of inferior designs or substitutes is forbidden. Proper retention of repair parts depends on always using the specified torque values when reconstructing assembly operations. To start the procedure activation the air suspension service switch needs to be turned OFF before putting the vehicle into NEUTRAL mode and hoisting it. The process starts with disconnecting the battery ground cable while also taking away the connection links for the suspension height sensor electrical connector and suspension height sensor. Install the height sensor by tightly fastening it to 25 Nm (18 lb-ft) using new bracket bolts that will be fitted to the height sensor brackets. The installation requires performing the direct opposite of all removal steps to achieve successful completion.