OEM 2007 Ford Crown Victoria Throttle Body

2007 Ford Crown Victoria Throttle Body Parts Questions & Experts Answers

• Q: How to service and repair the throttle body safely on 2007 Ford Crown Victoria?

  A: The first step to servicing the throttle body requires safety precautions including the prevention of smoking and open flames around fuel components because these contain highly flammable mixtures. Start the procedure by disconnecting the negative battery cable followed by taking off the air cleaner outlet tube. You should disconnect both the electrical connections for throttle actuator control and throttle position sensor. Shop owners should remove the four throttle body bolts before pulling out the throttle body unit while discarding the existing TB gasket. New TB gaskets should be utilized for installation and the throttle body must be fastened using all four bolts by first reaching 9 Nm (80 lb-in) then turning the bolts another 90 degrees. Reconnect both TAC and TP sensor electrical wires after reinstalling the air cleaner outlet tube then lastly reinstall the negative battery cable.