FordParts
My Garage
My Account
Cart
OEM 2007 Ford E-150 ABS Sensor
ABS Wheel Speed Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Sensors found
2007 Ford E-150 ABS Sensor, Passenger Side Part Number: 6C2Z-2C204-AA
$103.53 MSRP: $173.82You Save: $70.29 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Passenger Side
- Replaces: 4C2Z-2C204-AA
- Base No.: 2C204
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.5 x 2.6 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford E-150 ABS Sensor, Driver Side Part Number: 6C2Z-2C204-AB
Product Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Driver Side
- Replaces: 4C2Z-2C204-BA
- Base No.: 2C204
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.4 x 2.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2C204-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford E-150 ABS Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-150 ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-150 ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford E-150 ABS Sensor Parts Q&A
- Q: How to service the rear ABS sensor on 2007 Ford E-150?A: Subsequent service of the rear ABS sensor demands that you place the vehicle in neutral and support it on a hoist. Separate the electrical connection of the rear ABS sensor. The sensor area must receive a cleaning from dirt and foreign objects before sensor removal. The first step involves removing the bolt that maintains the rear ABS sensor after which you must remove the sensor. The correct torque for bolting the sensor into place should reach 27 Nm (20 ft. lbs.). Perform the reverse installation steps including evaluation of the O-ring for damage followed by light application of rear axle lubricant. The mounting surface requires a complete cleaning operation before reinstalling the parts.