FordParts
My Garage
My Account
Cart
OEM 2007 Ford Edge Differential Cover
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Differential Cover found
2007 Ford Edge Differential Cover, Rear Part Number: 7E5Z-4033-A
$88.04 MSRP: $128.15You Save: $40.11 (32%)Product Specifications- Other Name: Cover - Rear Axle Housing; Differential Cover, Rear; Axle Cover; Rear Cover; Differential Assy Cover; Cover
- Position: Rear
- Base No.: 4033
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.2 x 10.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-4033-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Differential Cover
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Differential Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Differential Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Edge Differential Cover Parts Q&A
- Q: How to service and repair the Differential Cover on 2007 Ford Edge?A: The first step for servicing and repairing the differential housing cover includes positioning the vehicle at neutral on a hoist. To begin service and repair of the differential you must remove the rear axle assembly and then the 10 bolts holding the rear differential cover before draining the differential fluid from its housing. A proper installation of new silicone sealant starts with clean machined surfaces on both rear axle housing and differential housing cover while protecting the rear axle interior from contamination. Direct your attention to the differential vent on the rear cover to ensure it stays open along with inspecting the gasket mating areas on the differential housing and cover before cleaning them. The differential housing cover must receive installation within 15 minutes of silicone application or professionals must reapply new sealant. A one-hour waiting period before lubricant fill should be used to guarantee complete silicone sealant curing. Use clear silicone rubber to create a continuous bead and put on the differential housing cover which requires installation of all 10 bolts at 23 Nm (17 ft. lbs). The service procedure requires you to put 1.15L (2.43 pt) rear axle lubricant into the axle but keep the fluid level between 3 and 5 mm (0.118-0.196 inch) below the bottom part of the filler hole before locking the filler plug to 29 Nm (21 ft. lbs). Finally, reinstall the axle assembly.