How to service the Yaw Sensor on 2007 Ford Edge?

In order to service the yaw rate sensor, disconnect the battery ground cable and remove the rear seat to access the stability control sensor cluster on the right. Disassemble the electrical connector, take off the securing nuts and insert the new cluster and calibrate it according to the scan tool instruction. Tighten the nuts to 9 Nm and turn the undoing process back.

OEM 2007 Ford Edge Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2007 Ford Edge Yaw Rate Sensor Part Number: 7T4Z-3C187-A
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Yaw Sensor
- Manufacturer Note: Sensor - Yaw
- Base No.: 3C187
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-3C187-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

2007 Ford Edge Yaw Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Yaw Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Yaw Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Edge Yaw Sensor Parts Q&A

Q: How to service the Yaw Sensor on 2007 Ford Edge?
A: In order to service the yaw rate sensor, disconnect the battery ground cable and remove the rear seat to access the stability control sensor cluster on the right. Disassemble the electrical connector, take off the securing nuts and insert the new cluster and calibrate it according to the scan tool instruction. Tighten the nuts to 9 Nm and turn the undoing process back.