How to service the front Power Window Motor on 2007 Ford F-250 Super Duty?

A technician must start front door window motor service by removing the window control switch or window crank handle from the vehicle but keeping the window crank handle cover secured in place and removing the retaining screw. The service begins by removing the front door trim panel alongside the watershield after which you must tape the window to stay in its full UP position. Remove the window motor electrical connector then use increased support to free the motor from its position by unfastening all retaining hardware. The motor installation requires screw torqueing at 13 Nm (10 lb-ft) followed by completing the installation with the reverse removal steps.

OEM 2007 Ford F-250 Super Duty Power Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Power Window Motors found

View related parts
2007 Ford F-250 Super Duty Window Regulator, Rear Passenger Side Part Number: 8C3Z-2627000-B
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Power Window Motor, Rear Right; Window Regulator, Rear Right; Window Assembly; Window Motor; Regulator Assembly; Power Window Motor
- Manufacturer Note: Complete Assembly, Includes Regulator, Motor And Attaching Components
- Position: Rear Passenger Side
- Replaces: F81Z-2627000-BA, YC3Z-3523394-BA, 6C3Z-2627000-BA
- Base No.: 23394
- Item Weight: 7.20 Pounds
- Item Dimensions: 27.3 x 4.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2627000-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2007 Ford F-250 Super Duty Window Regulator, Rear Driver Side Part Number: 8C3Z-2627001-B
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Power Window Motor, Rear Left; Window Regulator, Rear Left; Window Assembly; Window Motor; Regulator Assembly; Power Window Motor
- Manufacturer Note: Complete Assembly, Includes Regulator, Motor And Attaching Components
- Position: Rear Driver Side
- Replaces: 6C3Z-2627001-BA, F81Z-2627001-BA, YC3Z-3523395-BA
- Base No.: 23395
- Item Weight: 6.90 Pounds
- Item Dimensions: 31.9 x 5.0 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2627001-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2007 Ford F-250 Super Duty Window Regulator, Front Driver Side Part Number: 8C3Z-2523201-C
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Front Left Power Window Motor and Regulator.; Regulator Assembly
- Position: Front Driver Side
- Replaces: 6C3Z-2523201-BC, 7C3Z-7823395-A, YC3Z-1523395-AA, 7C3Z-2523201-BB
- Base No.: 23201
- Item Weight: 7.40 Pounds
- Item Dimensions: 27.0 x 4.1 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2523201-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2007 Ford F-250 Super Duty Window Motor Part Number: 6C3Z-7823394-AA
Product Specifications
- Other Name: Motor Assembly - Window Operating; Power Sliding Window Motor Hardware Kit; Repair Kit; Regulator
- Manufacturer Note: May Need To Remove Factory Jumper To Install Wiring
- Replaces: 4C3Z-1523394-AA
- Base No.: 23394
- Item Weight: 10.50 Pounds
- Item Dimensions: 66.6 x 21.9 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-7823394-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-250 Super Duty Window Regulator, Front Passenger Side Part Number: 8C3Z-2523200-C
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Front Right Power Window Motor and Regulator.; Regulator Assembly
- Position: Front Passenger Side
- Replaces: 3C3Z-2523200-BA, 6C3Z-2523200-BA, YC3Z-1523394-AA, 6C3Z-2523200-BC, 7C3Z-2523200-A
- Base No.: 23200
- Item Weight: 6.80 Pounds
- Item Dimensions: 27.3 x 4.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2523200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL

2007 Ford F-250 Super Duty Power Window Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-250 Super Duty Power Window Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-250 Super Duty Power Window Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-250 Super Duty Power Window Motor Parts Q&A

Q: How to service the front Power Window Motor on 2007 Ford F-250 Super Duty?
A: A technician must start front door window motor service by removing the window control switch or window crank handle from the vehicle but keeping the window crank handle cover secured in place and removing the retaining screw. The service begins by removing the front door trim panel alongside the watershield after which you must tape the window to stay in its full UP position. Remove the window motor electrical connector then use increased support to free the motor from its position by unfastening all retaining hardware. The motor installation requires screw torqueing at 13 Nm (10 lb-ft) followed by completing the installation with the reverse removal steps.